Toshiba 51HX94 owner manual IEEE-1394 device management, To edit the IEEE-1394 device information

Chapter 2: Connecting your TV

Connecting IEEE-1394 video devices (continued)

IEEE-1394 device management

The IEEE-1394 device information is saved in the TVÕs memory. You can edit this device information (for example, to edit the device name, change the analog input information, or delete the device information from the TVÕs memory if you no longer use that device).

To edit the IEEE-1394 device information:

1.Press MENU and open the SETUP menu.

2.Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 3 below).

Setup

Installation
Sleep Timer
On/Off Timer
HDMI Audio Selection				Auto
Side Show Interval			2 Sec
AVHD Skip Time			15 min
Convergence
				DVD RTN
	Navigate	Select			Back	EXIT	Exit
				CH RTN

3.Open the DEVICES menu, highlight IEEE-1394 DEVICES, and press ENTER.

Devices

IEE-1394 Devices

TheaterNet Devices

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

Important information regarding

IEEE-1394 device interconnection

Note:

•Do not loop the last device in the chain back to the TV. If the device chain is looped, the TV may not work properly with the other devices in the chain.

•Place devices with the slowest communication speed at the end of each chain. If a device with a slower communication speed is placed ahead of a faster device in the chain, the signal from the slower device will interfere with the signal from the faster device. To determine the communication speed of an IEEE-1394 device, look for an “S” number near the device’s IEEE-1394 connector. The higher the “S” number, the faster the device. If your device is not marked with an “S” number, look in the device’s user manual or call the device manufacturer’s technical support number.

•If your IEEE-1394 device has a two-position power switch, place the device at the end of the chain or leave the power switch ON at all times. If the power switch is OFF, it will interfere with signals from devices behind it in the chain.

•The maximum length for an IEEE-1394 cable between each device is 15 feet.

•This TV is an IEEE-1394A device. The IEEE-1394B protocol is faster and intended to allow for longer distances between devices and multi-room systems. IEEE-1394A–to–IEEE-1394B converters (available at some electronics suppliers) may allow compatibility of IEEE-1394B devices with your existing IEEE-1394A devices.

•The transmission capability of IEEE-1394 cable used with this TV must be S400 (400 Mbps maximum).

4. Highlight the device you want to edit and press ENTER.

5.Follow the on-screen prompts to modify the device information.

24 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.

51,57HX94(E)012-25 24 9/12/04, 7:03 PM