Gigabyte GA-K8NS user manual Standard Cmos Features, Time, IDE Channel 2/3 Master

English

2-1	Standard CMOS Features
		CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Tue, May 17 2005		Item Help
	Time (hh:mm:ss)		22:31:24		Menu Level`
` IDE Channel 0 Master			[None]		Change the day, month,
` IDE Channel 0 Slave			[None]		year
` IDE Channel 1 Master			[None]
` IDE Channel 1 Slave			[None]		<Week>
` IDE Channel 2 Master			[None]		Sun. to Sat.
` IDE Channel 3 Master			[None]		<Month>
	Drive A		[1.44M, 3.5"]		Jan. to Dec.
	Drive B		[None]		<Day>
	Halt On		[All, But Keyboard]		1 to 31 (or maximum
	Floppy 3 Mode Support		[Disabled]		allowed in the month)
					<Year>
					1999 to 2098
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
		F5: Previous Values		F7: Optimized Defaults
	Date
	The date format is <week>, <month>, <day>, <year>.
	Week	The week, from Sun. to Sat., determined by the BIOS and is display only
	Month	The month, Jan. Through Dec.
	Day	The day, from 1 to 31 (or the maximum allowed in the month)
	Year	The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave IDE devices setup. You can use one of three methods:

• Auto	Allows BIOS to automatically detect IDE devices during POST. (Default value)
• None	Select this if no IDE devices are used and the system will skip the automatic
	detection step and allow for faster system start up.
• Manual	User can manually input the correct settings.
Access Mode	Use this to set the access mode for the hard drive. The four options are:
	CHS/LBA/Large/Auto(default:Auto)

IDE Channel 2/3 Master

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

Extended IDE Drive

SATA IDE devices setup. You can use one of two methods:

• Auto	Allows BIOS to automatically detect SATA IDE devices during POST(default)
• None	Select this if no SATA IDE devices are used and the system will skip the
	automatic detection step and allow for faster system start up.

GA-K8NS(rev. 2.0) Motherboard - 30 -