8)PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode.
| Pin No. | Definition |
| 1 | MPD+ |
| 2 | MPD- |
1 | 3 | MPD- |
|
|
|
9) BATTERY
English
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
If you want to erase CMOS...
1.Turn OFF the computer and unplug the power cord.
2.Take out the battery gently and put it aside for about 10 minutes (Or you can use a metal object to connect the positive and negative pins in the battery holder to make them short for one minute).
3.
4.Plug the power cord and turn ON the computer.
- 21 - | Hardware Installation |
