Gigabyte GA-K8NS Power Management Setup, PME Event Wake Up, Modem Ring On, Resume by Alarm

2-4	Power Management Setup
		CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
			Power Management Setup
	ACPI Suspend Type		[S1(POS)]		Item Help
	Soft-Off by PWR-BTTN		[Instant-Off]		Menu Level`
	PME Event Wake Up		[Disabled]
	Modem Ring On		[Disabled]
	S3 Resume by USB device		[Disabled]
	Resume by Alarm		[Disabled]
x Day of Month Alarm			Everyday
x	Time (hh:mm:ss) Alarm		0 : 0 : 0
	Power On by Mouse		[Disabled]
	Power On by Keyboard		[Disabled]
x KB Power ON Password			Enter
	AC BACK Function		[Soft-Off]
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
		F5: Previous Values		F7: Optimized Defaults
	ACPI Suspend Type
	S1(POS)	Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
	S3(STR)	Set ACPI suspend type to S3/STR(Suspend To RAM).
	Soft-off by PWR-BTTN
	Instant-off	Press power button then Power off instantly. (Default value)
	Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed

less than 4 sec.

PME Event Wake Up

This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.

Disabled	Disable this function.
Enabled	Enable PME as wake up event. (Default value)
Modem Ring On

An incoming call via modem can awake the system from any suspend state.

Disabled	Disable Modem Ring on function. (Default value)
Enabled	Enable Modem Ring on function.
S3 Resume by USB device
Disabled	Disable this function. (Default value)
Enable	Enable USB device wake up system from S3 suspend type.

Resume by Alarm

You can set "Resume by Alarm" item to enabled and key in Date/Time to power on system.

Disabled	Disable this function. (Default value)
Enabled	Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Day of Month Alarm :		Everyday, 1~31
Time (hh: mm: ss) Alarm :		(0~23) : (0~59) : (0~59)

English

- 37 - BIOS Setup