INSTALLATION INSTRUCTIONS
CHIPPER/SHREDDER VACUUM KIT Mfg. Nos. 1692210, 1692231, 1692353,900OlOO
A WARNING
Turn off the engine, let the rotor come to a complete stop and disconnect the spark plug wire before assembling the vacuum kit or changing attachments.
A W A R N I N G
Never remove% adapter from the back of the machine while the machine is running or the rotor is turning. The rotor is pinning just inch- es away from the adapter iniet. Serious injury will result if you put your fingers or foot in the adapter inlet while the rotor is turning!
INSTALLATION
1.Remove the rotor housing cover. Retain the screws.
2.Replace the cover with the adapter (1A or 1 B) using the screws removed in step 1 and washers (15).
3.Twist the coupler (2) onto the end of the hose (4). Insert the coupler into the adapter hy aligning the
INever operate the machine without the cou pier/hose assembly or plug connected to the
arrows (or seams) running along the top of the cou- pler with those on the adapter. Push fully in and turn until it snaps into place.
NOTE: Insert plug (3) into adapter when vacuum attachment is not in use. See Removing the Vacuum Kit on the next page.
4.Slip the grip (12) onto the handle (11). Putting some soap on the handle will make the grip slide on easi- er.
5.Connect the handle to the nozzle (6) using the screw (lo), washers (9) and nut (8).
6.Connect nozzle (6) or leaf tray (5) to the hose,.
7.Securely place hopper lid (14) on hopper.
Ref. | Qty. | Part No. | Description |
1A | 1 | 1021100 | Adapter |
1B | 1 | 1713522 | Adapter (European Model) |
2 | 1 | 1023100 | Coupler |
3 | 1 | 1025100 | Plug |
41 1035100 Hose, 10’ x 4” Dia.
51 1027100 Leaf Tray
61 1030100 Nozzle
71 1024100 Ring
81 1960294 Nut, Hex, Flange,
91 1921319 Washer, l/4
IO | 1 | 6041612 | Screw, | Phillups Hd. | |
|
|
| |||
1 1 | 1 | 1026100 | Handle |
|
|
12 | 1 | 1028100 | Grip, Handle | ||
13 | 1 | 5001612 | Decal, | Danger | |
14 | 1 | 1709404* | Hopper | Lid | (Orange) |
| 1 | lOlQlOO* | Hopper | Lid | (Gold) |
| 1 | 1709467* | Hopper | Lid | (Red) |
15 | 3 | 1919326 |
|
|
|
•Lid color depends on which kit you’ve ordered. Only one lid is packaged per kit.
Figure 1. Kit Parts | FORM - 1709566 |
| PRINTED IN U.S.A. |
| 12l93SMI |