Step 2; See Figure 2 & 2A:
Install Front Panel Frame (1)
A.Remove the bolt at reference A on both sides of the tractor. Place the Front Panel Frame over the dash from behind. Insert two 5/16” x 1 1/4” bolt inwards through the holes in the Front Panel Frame Legs.
B.Place a 5/8” O.D. x 1/2” spacer over the bolt. Insert the bolts into the holes at reference A. Tighten just enough to keep the frame upright.
1
A
Figure 2
|
|
|
|
Figure 2A |
| A | |
|
|
|
|
Step 3; See Figure 3:
Install right Foot (1)
A.Insert a 5/16” x 1 3/4” full thread screw into the clamp of one of the Feet.
.
B.Place the clamp over the edge of the step plate as shown in Figure 3A Tighten the bolt just enough to hold it in place. Repeat this step on the left side.
Figure 3A
2
Figure 3
6
