Snapper 1695464 manual Install Hitch Plate, Install Upright Support, Install Bag and Cover Support

Turbo Installation / Triple Catcher Bag Installation

Install Hitch Plate

1.Place the hitch plate (A, Figure 6) onto the bumper

(B)and loosely tighten with U-bolts (C) and locknuts

2.After the hitch plate is properly centered on the bumper, tighten the locknuts securely.

A	D
B
C
	D
C

Figure 6. Install Hitch Plate
A. Hitch Plate	C. U-Bolts
B. Bumper, Tube	D 3/8-16 Locknuts

Install Upright Support

1.Set the upright support (A, Figure 7) onto pins of hitch plate (B)

2.Secure with rod (C) and hair pin (D).

D

A

C

B

Figure 7. Install Upright Support

A.	Upright Support	C. Rod
B.	Hitch Plate	D. Hair Pin

Install Bag and Cover Support

1.Install the bag and cover support (A, Figure 8) to upright support (B).

2.Secure with capscrews (C) and locknuts (D).

A	D
C
	B

Figure 8. Install Bag and Cover Support

A.	Bag and Cover Support	C. 3/8-16 x 1 Capscrews
B.	Upright Support	D. 3/8-16 Locknuts

8