Turbo Installation
Install Deflector and Hinge
1.Install the new deflector and hinge assembly (A, Figure 3) onto
2.Secure front of hinge bracket using a new carriage bolt (B), cylinder spacer (C), lockwasher (D), and nut
(E).
Install Turbo Blower
1.Pivot the deflector (A, Figure 4) up and out of the way.
2.Install the turbo blower assembly (B) over the tapered spacers. Turbo should hook the bottom hook plate.
3.Secure back of hinge bracket using carriage bolt (F), tapered spacer (G), cylinder spacer (C), lockwasher (D), and nut (E).
E | E |
D | D |
| |
C | C |
| A |
| G |
B |
|
| F |
Figure 3. Install Deflector and Hinge
A.Deflector and Hinge Assembly
B.
C.13/16 x 1 Cylinder Spacer
D.Lockwashers
E.
F.
G.Tapered Spacers
3.Install one spring clip (C) on tapered spacers at the front and rear of hinge to hold in place.
4.Secure turbo blower on hook plate (A, Figure 2) using plastic knob (D, Figure 4).
5.Push the lever (A, Figure 5) counterclockwise to release tension on the belt, and install the belt on the arbor pulley (B).
B |
D |
A |
C |
C |
Figure 4. Install Turbo Blower Assembly
A. DeflectorC. Spring Clips B. Turbo Blower Assembly D. Plastic Knob
B |
FRONT |
A |
Figure 5. | Belt Routing |
A. Lever | B. Arbor Pulley |
7