Triple Catcher Bag Installation / Turbo Removal
Install Carrier and Front Weight(s)
1.Install carrier (A, Figure 12) as shown and secure with capscrews (B) and locknuts (C).
2.Secure weight(s) (D) using rod (E) and safety clips (F).
C |
A |
B |
B |
F |
E |
F |
D |
Remove Turbo Blower
WARNING
The deflector must be properly installed in the down position and retained. Do not operate the unit without a deflector.
1.Remove the plastic knob (D, Figure 4) that secures the turbo blower to the hook plate.
2.Push the lever (A, Figure 5) counterclockwise to release tension on the belt, and remove the belt from the arbor pulley (B).
3.Remove spring clips (C, Figure 4) from tapered spac- ers (C, Figure 3) at the front and rear of hinge.
4.Remove the turbo blower assembly (A. Figure 4) from the mower deck.
5.Return the deflector to the down position.
NOTE: The front baffles (Figure 1) do not need to be removed.
Figure 12. Install Carrier and Front Weight(s)
A. Carrier, Weight | D. Weight(s) |
B. | E. Rod |
Capscrews | F. Safety Clips |
C. |
|
11
