Install Push Bar
1.Drive the tractor over the push bar until the rear of the push bar is positioned between the side rail exten- sions on the front of the hitch.
2.Stop engine, remove key and set parking brake.
3.See Figure 15. Align the mounting holes in the rear corners of the push bar (A) with the mounting holes in the hitch (B), and secure the push bar to the hitch with a clevis pin (C), and safety clip (D) at each cor- ner.
Initial Setup & Assembly
C
D
B
A
Figure 15. |
|
A. Push Bar | C. Clevis Pin |
B. Hitch | D. Safety Clip |
| (Not shown) |
4. See Figure 16. Insert front of push bar (A) into pivot frame (B) on rear of blade. Then install the pivot pin
(C)down thru front holes in hitch and pivot frame. Secure with spring clip (D).
Figure 16. Dozer Blade Assembled and Installed
A. | Push Bar | C. Pivot Pin |
B. | Pivot Frame | D. Spring Clip |
13
