Removing and Re-attaching Grass Catcher
A |
C |
B |
D |
Figure 5. Install Back Plate |
|
A. Back Plate & Support | C. Hitch Plate |
B. Hair Pin | C. Rod |
Re-attaching the Grass Catcher
1.Set the back plate and support (A, Figure 5) onto pins of hitch plate (C). Secure with rod (D) and hair pin
(B).
3.Hook the bags (A, Figure 6) on the back plate(B).
4.Install the catcher cover (A, Figure 7 & 8) and secure with the hinge pins (B) and hair pin clips (D).
NOTE: Push the hair pin clips all the way on or they will be bent by the hinge when the cover is opened.
5.Insert middle & lower tube (B, Figure 4) into upper tube (A) and clip (C) onto turbo.
A |
B |
Figure 6. Bags
A.Bags
B.Back Plate
C |
A |
B |
Figure 7. Install Cover
A. CoverC. Hinges
B. Bags
A
B
D
C
Figure 8. Install HInge Pins |
|
A. Cover | C. Hinge |
B. Hinge Pin | D. Hair Pin Clip |
15
