TROUBLESHOOTING

PROBLEM

 

PROBABLE CAUSE

 

CORRECTIVE ACTION

 

 

 

 

 

 

Engine Will Not Start

1. Fuel tank empty.

1.

Fill fuel tank with fresh fuel.

 

Using Recoil Starter

 

 

 

 

2. Engine needs choking or priming.

2.

Choke/Prime. Check Engine Manual for

 

 

 

 

 

Instructions.

 

 

3.

Spark plug wire disconnected.

3.

Place spark plug wire onto spark plug.

 

 

 

 

 

 

Engine Stalls or Stops

1. Blade control is released or is not being held securely

1.

Blade control should be held securely against

 

After Running

 

against handle.

 

handle at all times during operation of mower.

 

 

2.

Fuel tank empty.

2.

Fill with fuel to proper level.

 

 

 

 

 

 

 

 

3.

Engine air pre-cleaner and or air cleaner dirty.

3.

Clean free of all debris.

 

 

 

 

 

 

 

 

4.

Spark plug defective or gap set improperly.

4.

Service spark plug.

 

 

 

 

 

 

 

 

5.

Water, debris or stale fuel in fuel system.

5.

Drain and clean fuel system.

 

 

 

 

 

 

Engine Loses Power

1. Engine air pre-cleaner or air cleaner dirty

1.

Clean or replace filters.

 

 

 

 

 

 

 

 

2.

Spark plug faulty.

2.

Service spark plug.

 

 

3.

Water, debris or stale fuel in fuel system.

3.

Drain and clean fuel system.

 

 

 

 

 

 

Excessive Vibration

1. Damaged, out of balance or bent mower blade.

1.

Service mower blade.

 

 

 

 

 

 

 

 

2.

Loose blade components.

2.

Service and tighten loose parts.

 

 

 

 

 

 

 

 

3.

Loose or missing air lift (if equipped).

3.

Replace air lifts. Tighten to proper torque.

 

 

 

 

 

 

 

 

4.

Lumpy or frayed belt

4.

Replace belt.

 

 

 

 

 

 

Mower Will Not Move

1. Damaged transmission

1.

Contact authorized SNAPPER dealer.

 

Loss Of Traction

2. Traction drive belt requires replacement

2.

Replace traction drive belt.

 

(Self-Propelled Models)

3. Driven disc slipping

3.

Clean or replace driven disc.

 

 

 

 

 

 

Cutting Grass

1. Cutting height too low or high.

1.

Adjust cutting height.

 

 

 

 

 

Improperly

2. Engine speed too slow.

2. Move engine speed control to “FAST” position.

 

 

 

 

 

 

 

 

3.

Forward ground speed too fast.

3.

Move ground speed control to a slower speed.

 

 

 

 

 

 

 

 

4.

Terraced cut, side to side.

4.

Adjust height of cut with height adjust levers.

 

 

 

 

 

 

 

 

5.

Excessive deck pitch, front to rear.

5.

Adjust height of cut with height adjust levers.

 

 

 

 

 

 

 

 

6.

Cutting blade dull or damaged.

6.

Sharpen cutting edges or replace blade.

 

 

 

 

 

 

Poor Grass Discharge

1. Engine speed too slow.

1.

Move engine speed control to “FAST” position

.

 

 

 

 

 

 

 

2.

Forward speed too fast.

2.

Move ground speed control to a slower speed.

 

 

 

 

 

 

 

 

3.

Grass is wet.

3.

Mow when grass is dry.

 

 

 

 

 

 

 

 

4.

Excessively worn or damaged blade.

4.

Service mower blade.

 

 

 

 

 

 

 

 

5.

Build up of grass clippings and debris under deck.

5.

Clean deck.

 

 

 

 

 

 

 

 

6.

Improper blade installed on deck.

6.

Install proper SNAPPER blade.

 

 

 

 

 

 

 

 

7.

Blade installed improperly on deck.

7.

Install blade properly.

 

 

 

 

 

 

Oil Leaking

1. Leaking engine case.

1.

Contact authorized SNAPPER dealer.

 

 

 

 

2.

Check and tighten drain plug.

 

 

 

 

3.

Make sure dip stick or oil filler cap is securely

 

 

 

 

 

in place.

 

20

Page 20
Image 20
Snapper 2167517BV, P2167517BV, P2167517BVE, WP2167517BV Troubleshooting, Problem Probable Cause Corrective Action

216517B, 2167517BV, R215517HC, R2167517BV, P215517HC, P216517B, P216517BV, P216517BVE, P217017BV, P217017BVE, RP215517HC, RP216751BV, RP217017BV, RP2167517BVE, RP217017BVE, WP2167517BV, WP216517BV, WRP216517BE, FRP2167517BV, EP2167517BV, EP217017BV, ERP21, 2167517BV, P2167517BV, P2167517BVE, WP2167517BV specifications

Snapper is a well-known brand in the power equipment industry, particularly recognized for its line of high-quality lawn mowers and outdoor power tools. Among its extensive product range, the Snapper model numbers 216517B, 2167517BV, R215517HC, R2167517BV, P215517HC, P216517B, P216517BV, P216517BVE, P217017BV, P217017BVE, RP215517HC, RP216751BV, RP217017BV, RP2167517BVE, RP217017BVE, WP2167517BV, WP216517BV, WRP216517BE, FRP2167517BV, EP2167517BV, EP217017BV, and ERP21,2167517BV all stand out for their performance and reliability.

These models are designed with advanced engines that deliver powerful performance, enabling users to tackle even the toughest mowing jobs. The cutting deck technology is engineered for precision and efficiency, contributing to clean and even cuts. Many of these models feature a robust steel construction, ensuring durability and longevity for the equipment.

Some models offer various cutting heights, allowing for customizable lawn care, catering to different grass types and user preferences. Additionally, Snapper mowers are equipped with an ergonomic handle design, ensuring comfort during use while reducing fatigue. The availability of multiple speed settings enhances user control and convenience.

Another significant feature is the ease of maintenance; many of the Snapper models are designed for straightforward access to blades and engines, making routine care less cumbersome. The introduction of innovations such as electric start options in certain models enhances user-friendliness, appealing to both seasoned landscapers and new users.

Snapper also integrates eco-friendly technologies into their products, ensuring emissions are kept to a minimum without compromising power. Models like the P216517BVE and WP2167517BV exemplify this balance of performance and sustainability.

With a commitment to quality and innovation, Snapper continues to provide versatile, reliable, and efficient mowing solutions suitable for both residential and commercial applications. Whether it's the robust R2167517BV or the user-friendly P215517HC, Snapper’s extensive lineup is tailored to meet a diverse range of lawn care needs, making them a go-to choice for outdoor power equipment enthusiasts.