Snapper manual Product Specifications, 355ZB2654

Specifications

Product Specifications	355ZB2654
Deck Size (inches)	54”
Height of Cut (inches)	1.5” - 4.5”
Transaxle Type	HydroGear ZT2800
Ground Speed - Fwd/Rev (mph)	0 - 7 / 0 - 5
Engine Power (hp)	26.0*
Engine Displacement (cc)	570
Fuel Tank Capacity (gal)	6.5

*Engine Power Rating Information

The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

43