6
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER Rear Engine Rider. Its purpose, aside from
recommending standard operating procedures and
routine service requirements, is to promote SAFETY
through the use of accepted operating practices. Read,
Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Pages 2 thru 4 of this manual and
All SAFETY messages on the Rear Engine Rider and its
attachments before operating.
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows the
essential parts of the SNAPPER Rear Engine Rider. It is
recommended that all operators of this equipment
become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are
found in the separate engine owner’s manual. Study
these manuals before operating and keep both handy
for future reference.
ENGINE SPEED AND CHOKE
LOCATED LEFT OF SEAT
FUEL FILLER CAP
AND VENT
FUEL TANK
TRANSMISSION
SHIFT LEVER
OVERRIDE
LEVER
DISCHARGE
DEFLECTOR
BLADE
LEVER
DECK LIFT
LEVER
CLUTCH/BRAKE
PEDAL
BLADE
PEDALS
PARK BRAKE
LATCH