Controls & Operation

GENERAL OPERATION

CHECKS BEFORE EACH START-UP

1.Make sure all safety guards are in place and all nuts, bolts and clips are secure.

2.Check the fuel supply. Fill the tank no closer than 1/4 to 1/2 inch of top of tank to provide space for expan- sion. See your engine Owner’s Manual for fuel rec- ommendations.

3.Check the Auger Control (A, Figure 7) for proper operation. If adjustment is required, see the Service Section for procedures.

4.Check the Chute Direction Control (B, Figure 7) for proper operation. The discharge chute should rotate freely in both directions. See the Service section for adjustment procedures and troubleshooting.

5.Check the Chute Deflector (C, Figure 7) for proper operation. The deflector should pivot freely up and down. See the Service Section for procedures.

6.Position the chute at the desired starting direction and set the deflector at the desired angle.

DANGER

Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains CARBON MONOXIDE, an ODORLESS and

DEADLY GAS.

DANGER

DO NOT clean out discharge chute with hands. Contact with moving parts in the chute will cause serious injury. Use clean-out tool provided with machine.

WARNING

OPERATIONAL WARNINGS

Clearing The Discharge Chute

To avoid serious injury, do not put your hands into the auger housing or discharge chute. If the auger stalls or chute becomes plugged, use the following procedure to remove objects or clear the chute:

1.Release the auger control.

2.Shut off the engine.

3.Remove the key.

4.Wait for all moving parts to stop.

5.Use the clean-out tool to remove foreign objects and clear the chute or auger. Never put your hands into the auger or discharge chute.

6.If servicing is needed, remove cover and disconnect spark plug wire.

Discharge Chute Adjustment

Release the auger control and make sure the auger has STOPPED before rotating the discharge chute or adjusting the deflector. DO NOT place hands near the auger while the engine is running.

Thrown Objects

Objects can be thrown by the snowthrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from the area.

Slope Operation

For your safety, operation on slopes should be in an up and down direction only. If it becomes necessary to move across the face of a slope, use caution and do not activate the auger. Be very careful when changing direction on a slope.

Proper winter footwear is recommended for the operator to help prevent slipping. Never attempt to clean snow from slopes. The maximum slope for any operation is 17.7% (10º).

Do not use the snowthrower on surfaces above ground level such as the roof of a building.

12

Page 13 Page 15
Page 14
Image 14
Snapper 522E manual Checks Before Each START-UP, Operational Warnings
Page 13 Page 15

522E specifications

The Snapper 522E is a reliable and efficient self-propelled mower that caters to homeowners seeking a powerful and user-friendly lawn care solution. Designed with performance and convenience in mind, the Snapper 522E stands out in the crowded market of lawnmowers by offering an array of impressive features and technologies.

One of the main highlights of the Snapper 522E is its robust 190cc engine, which delivers impressive power for tackling even the toughest grass and uneven terrains. The engine is designed with advanced technology to ensure reliable starting and consistent performance, allowing users to mow their lawns with ease. The variable speed rear-wheel drive system enhances maneuverability, making it easier to navigate around obstacles and uneven areas in your yard.

The cutting deck of the Snapper 522E is 22 inches wide, providing a balance between efficiency and precision. This size is ideal for medium to large lawns, allowing the mower to cover ground quickly while still enabling the user to achieve a clean, professional-looking cut. Additionally, the mower features a three-in-one cutting system that allows for bagging, side discharge, or mulching. This versatility ensures that homeowners have options depending on their lawn care preferences and needs.

For added comfort during operation, the Snapper 522E is equipped with an adjustable handle that can be easily tailored to the height of the user. This feature enhances ergonomic comfort, reducing the strain on the back and arms during prolonged use. Furthermore, the mower’s durable construction and high-quality materials ensure longevity and reliable performance season after season.

Another noteworthy characteristic of the Snapper 522E is its ease of maintenance. The design simplifies access to critical components, making routine maintenance tasks such as oil changes and blade sharpening easier to perform. This attention to user-friendly maintenance further enhances the overall ownership experience.

In summary, the Snapper 522E offers homeowners a blend of power, versatility, and ease of use in a self-propelled mower. With its reliable engine, adjustable features, and smart design, the 522E is well-equipped to meet the mowing demands of any homeowner, making lawn care an efficient and enjoyable task. Whether you prefer bagging, mulching, or side discharge, the Snapper 522E ensures you have the tools needed to maintain a beautiful lawn.
Top Page Image Contents