ADDING ENGINE OIL

1.Make sure the unit is level. Use a high quality deter- gent oil classified “For Service SG, SH, SJ, SL, or higher”.

2.Remove the oil fill cap/dipstick access panel (A, Figure 9).

2.Remove the oil fill cap/dipstick (B) and wipe with a clean cloth.

3.Insert the oil fill cap/dipstick (B) and turn clockwise to tighten.

4.Remove the oil fill cap/dipstick (B) and check the oil.

NOTE: Do not check the level of the oil while the engine is running.

5.If necessary, add oil until the oil reaches the FULL mark on the oil fill/cap dipstick (see Figure 9). Do not add too much oil.

6.Tighten the fill cap/dipstick securely each time you check the oil level.

NOTE: For extreme cold operating conditions of 0°F(-18°

C)and below, use a synthetic 5W30 motor oil for easier starting.

NOTE: S.A.E. 5W30 motor oil may be used to make starting easier in areas where the temperature is 20° F

.(-7° C) to 0F (-18° C). Synthetic 5W30 is acceptable for all temperatures. DO NOT mix oil with gasoline.

NOTE: SEE CHART FOR OIL RECOMMENDATION

Use oil classified API Service Class SF, SG, SH, SJ or better with SAE Viscosity:

 

 

5W-30 Conventional

 

 

 

5W-30 Synthetic

 

 

 

˚F

-20

0

20

32

40

˚C

-30

-18

-7

0

4

ADDING FUEL

To add fuel:

1.Remove the fuel cap (C, Figure 9).

2.Fill the tank. Do not overfill. Leave room in the tank for fuel expansion. Fill the fuel tank with fresh, clean, unleaded regular, un-leaded premium, or reformulat- ed automotive gasoline with a minimum of 85 octane along with a fuel stabilizer (follow instructions on fuel stabilizer package). DO NOT use leaded gasoline.

Controls & Operation

A

C

B

Figure 9. Add / Check Engine Oil and Gasoline

A.Access Panel

B.Oil Fill Cap/Dipstick

C.Fuel Cap

We recommend that fuel stabilizer be added to the fuel each time that gasoline is added to the fuel tank. Refer to your engine manual for further specific fuel recommendations.

3.Install and hand tighten the fuel cap.

NOTE: Winter grade gasoline has higher volatility to improve starting. Be certain container is clean and free from rust or other foreign particles. Never use gasoline that may be stale from long periods of stor- age in the container.

CAUTION: DO NOT use gasoline containing any amount of alcohol as it can cause serious damage to the engine or significantly reduce the performance

WARNING

Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is still hot from recent operation. Do not allow open flame, smoking or matches in the area. Avoid over-filling and wipe up any spills.

Do not use gasoline containing METHANOL, gasohol containing more than

10% ETHANOL, gasoline additives, or white gas because engine/fuel system damage could result.

13

Page 14 Page 16
Page 15
Image 15
Snapper 522E manual Adding Engine OIL, Adding Fuel
Page 14 Page 16

522E specifications

The Snapper 522E is a reliable and efficient self-propelled mower that caters to homeowners seeking a powerful and user-friendly lawn care solution. Designed with performance and convenience in mind, the Snapper 522E stands out in the crowded market of lawnmowers by offering an array of impressive features and technologies.

One of the main highlights of the Snapper 522E is its robust 190cc engine, which delivers impressive power for tackling even the toughest grass and uneven terrains. The engine is designed with advanced technology to ensure reliable starting and consistent performance, allowing users to mow their lawns with ease. The variable speed rear-wheel drive system enhances maneuverability, making it easier to navigate around obstacles and uneven areas in your yard.

The cutting deck of the Snapper 522E is 22 inches wide, providing a balance between efficiency and precision. This size is ideal for medium to large lawns, allowing the mower to cover ground quickly while still enabling the user to achieve a clean, professional-looking cut. Additionally, the mower features a three-in-one cutting system that allows for bagging, side discharge, or mulching. This versatility ensures that homeowners have options depending on their lawn care preferences and needs.

For added comfort during operation, the Snapper 522E is equipped with an adjustable handle that can be easily tailored to the height of the user. This feature enhances ergonomic comfort, reducing the strain on the back and arms during prolonged use. Furthermore, the mower’s durable construction and high-quality materials ensure longevity and reliable performance season after season.

Another noteworthy characteristic of the Snapper 522E is its ease of maintenance. The design simplifies access to critical components, making routine maintenance tasks such as oil changes and blade sharpening easier to perform. This attention to user-friendly maintenance further enhances the overall ownership experience.

In summary, the Snapper 522E offers homeowners a blend of power, versatility, and ease of use in a self-propelled mower. With its reliable engine, adjustable features, and smart design, the 522E is well-equipped to meet the mowing demands of any homeowner, making lawn care an efficient and enjoyable task. Whether you prefer bagging, mulching, or side discharge, the Snapper 522E ensures you have the tools needed to maintain a beautiful lawn.
Top Page Image Contents