Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper 5900696 Features and Controls, Control Functions, Ground Speed Levers, Ignition Switch

Models: S150X Series 5900696 5900686 5900697 5900665

1 49

Download 49 pages 44.52 Kb

Page 16

Features and Controls

Controls

Figure 2. Control Locations

Control Functions

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.

Ground Speed Levers

These levers control the ground speed of the rider. The left lever controls the left rear drive wheel and the right lever controls the right rear drive wheel.

Moving a lever forward increases the FORWARD speed of the associated wheel, and pulling back on a lever increases the REVERSE speed.

Note: The further a lever is moved away from the neutral position the faster the drive wheel will turn.

See the Operation section for proper steering instructions.

Seat Adjustment Lever

The seat can be adjusted forward and back. Move the lever towards the left, position the seat as desired, and release the lever to lock the seat in position.

Ignition Switch

The ignition switch starts and stops the engine, it has three positions:

OFF	Stops the engine and shuts off the
	electrical system.
RUN	Allows the engine to run and powers
	the electrical system.
START	Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the battery.

14	www.SnapperPro.com

Image 16

Snapper 5900696 Features and Controls, Control Functions, Ground Speed Levers, Seat Adjustment Lever, Ignition Switch

Contents

Description Briggs & Stratton Yard Power Products GroupModel Number Date Purchased Table of Contents Operator Safety Safety Rules and InformationOperating Safety Read the Manual Thrown Objects Slope OperationMoving Parts Retaining WALLS, DROP-OFFS, and Water Roll BAR USEOverhead Obstacles Fuel and Maintenance Enclosed Areas Preparation TrainingOperation Towed Equipment RIDE-ON Units EmissionsIgnition System Gasoline Models Periods of exposure Maintenance and Storage Service and MaintenanceSafe Handling of Gasoline Roll BAR Instructions Operational Warnings Inspection and Maintenance of the Roll BAR Seat Belt Safety Decals This unit has been designed and manufactured to provide Safety Interlock System Operational Safety ChecksSafety Icons North American Safety Icons Features and Controls Identification Numbers Features and Controls Seat Adjustment LeverIgnition Switch Control Functions Features & Controls Operation General Operating SafetyChecks Before Starting Seat Adjustment Check Tire Pressures Foot Pedal Adjustment Mowing Height AdjustmentTo adjust pedal position Lower the roll bar only when necessary and Never remove it Raise and Lower the Roll BarKeep roll bar in the raised position and use the seat belt To Lower the Roll Bar Stopping the Rider Starting the EnginePushing the Rider By Hand Forward Travel Practice Zero Turn Driving PracticeForward Reverse Travel Practice Turning Around a Corner Practice Turning In PlaceExecuting an End-Of-Row Zero Turn Executing Turns Mowing Mowing RecommendationsHeight of Grass Tall Grass Requires Incremental Cutting Mowing Methods Attaching a Trailer Proper MulchingMulching Requires Excellent Mowing Conditions Engine Speed & Ground Speed for Mulching Regular Maintenance Maintenance ScheduleSafety Items Before Every Spring Hours Fall Check Rider / Mower for loose hardware Engine Maintenance Checking / Adding FuelFuel Filter Change Oil & Filter Lubrication GreaseOil Lubricating the Front Casters Change Hydraulic Oil Filter Check Hydraulic Oil LevelChange Interval Every 250 Hours Filter Part Number Inspecting the Mower Blades Servicing The Mower BladesNever weld or straighten bent mower blades Reinstalling the Mower Blades Balancing the Mower Blade Nail Ground Speed Control Lever Adjustment Speed Balancing Adjustment Neutral Adjustment Parking Brake Adjustment Return-to-Neutral Adjustment Deck Rod Timing Adjustment Deck Leveling Adjustment Mower Belt Replacement To avoid damaging belts, do not PRY Belts Over Pulleys Hydraulic Pump Drive Belt Replacement Use extreme caution when removing this spring Battery Maintenance Battery Service Checking Battery VoltageCharging a Completely Discharged Battery Jump Starting With Auxiliary Booster Battery Starter Switch Jumper Cable Starting Vehicle Battery Jumper Cable To Ground Engine BlockThis HOOK-UP for Negative Ground Vehicles Make Certain Vehicles do not Touch Storage Starting After Long Term StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 Days Troubleshooting the Rider Troubleshooting ChartProblem Cause Remedy Troubleshooting Troubleshooting Troubleshooting Common Cutting Problems Specifications DimensionsEngine Chassis Ferris Limited Warranty Tractor Mower Deck