Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper 5900686, 5900696, 5900697, 5900665 Lubrication, Grease, Oil, Lubricating the Front Casters

Models: S150X Series 5900696 5900686 5900697 5900665

1 49

Download 49 pages 44.52 Kb

Page 30

Maintenance

Regular Maintenance

Lubrication

Lubricate the unit at the locations shown in Figures 21 through 24 as well as the following lubrication points.

Grease:

•front caster wheel axles & yokes

•deck lift pivot blocks

•mower deck spindles

•mower deck idler arm

Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.

Not all greases are compatible. Red Grease (p/n 5022285) is recommended, automotive-type high-temperature, lithium grease may be used when this is not available.

Oil:

•control handle pivots

•seat plate pivots

•deck lift pivots

•discharge chute hinge

Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and surfaces clean both before and after lubrication.

Lubricating the Front Casters:

NOTE: Front casters should be lubricated annually.

1.Remove the 1/4-28 bolt (A, Figure 24) screwed into the front caster and install a 1/4-28 grease fitting.

2.Grease the front caster.

3.Remove the 1/4-28 grease fitting and reinstall the 1/4-28 bolt.

4.Repeat process for the other side of the machine.

Figure 21. Deck Lubrication

Figure 22. Control Handle Pivots & Seat Plate Pivots

Figure 23. Deck Lift Linkage Pivots

A

Figure 24. Front Caster & Wheel

A. 1/4-28 Bolt

28	www.SnapperPro.com

Image 30

Snapper 5900686, 5900696, 5900697, 5900665, S150X Series manual Lubrication, Grease, Oil, Lubricating the Front Casters

Contents

Briggs & Stratton Yard Power Products Group DescriptionModel Number Date Purchased Table of Contents Operating Safety Operator SafetySafety Rules and Information Read the ManualSlope Operation Thrown ObjectsMoving Parts Roll BAR USE Retaining WALLS, DROP-OFFS, and WaterOverhead Obstacles Fuel and Maintenance Enclosed AreasTraining PreparationOperation Ignition System Gasoline Models Towed Equipment RIDE-ON UnitsEmissions Periods of exposureService and Maintenance Maintenance and StorageSafe Handling of Gasoline Roll BAR Instructions Operational WarningsInspection and Maintenance of the Roll BAR Seat Belt Safety Decals This unit has been designed and manufactured to provideSafety Icons Safety Interlock SystemOperational Safety Checks North American Safety IconsFeatures and Controls Identification NumbersIgnition Switch Features and ControlsSeat Adjustment Lever Control FunctionsFeatures & Controls General Operating Safety OperationChecks Before Starting Seat Adjustment Check Tire PressuresMowing Height Adjustment Foot Pedal AdjustmentTo adjust pedal position Keep roll bar in the raised position and use the seat belt Lower the roll bar only when necessary and Never remove itRaise and Lower the Roll Bar To Lower the Roll BarStarting the Engine Stopping the RiderPushing the Rider By Hand Zero Turn Driving Practice Forward Travel PracticeForward Reverse Travel Executing an End-Of-Row Zero Turn Practice Turning Around a CornerPractice Turning In Place Executing TurnsHeight of Grass MowingMowing Recommendations Tall Grass Requires Incremental CuttingMowing Methods Mulching Requires Excellent Mowing Conditions Attaching a TrailerProper Mulching Engine Speed & Ground Speed for MulchingSafety Items Before Every Spring Regular MaintenanceMaintenance Schedule Hours Fall Check Rider / Mower for loose hardwareFuel Filter Engine MaintenanceChecking / Adding Fuel Change Oil & FilterOil LubricationGrease Lubricating the Front CastersCheck Hydraulic Oil Level Change Hydraulic Oil FilterChange Interval Every 250 Hours Filter Part Number Servicing The Mower Blades Inspecting the Mower BladesNever weld or straighten bent mower blades Reinstalling the Mower Blades Balancing the Mower Blade NailGround Speed Control Lever Adjustment Speed Balancing AdjustmentNeutral Adjustment Parking Brake AdjustmentReturn-to-Neutral Adjustment Deck Rod Timing Adjustment Deck Leveling AdjustmentMower Belt Replacement To avoid damaging belts, do not PRY Belts Over PulleysHydraulic Pump Drive Belt Replacement Use extreme caution when removing this springBattery Maintenance Charging a Completely Discharged Battery Battery ServiceChecking Battery Voltage Jump Starting With Auxiliary Booster BatteryThis HOOK-UP for Negative Ground Vehicles Starter Switch Jumper Cable StartingVehicle Battery Jumper Cable To Ground Engine Block Make Certain Vehicles do not TouchTemporary Storage 30 Days Or Less StorageStarting After Long Term Storage Long Term Storage Longer Than 30 DaysTroubleshooting Chart Troubleshooting the RiderProblem Cause Remedy Troubleshooting Troubleshooting Troubleshooting Common Cutting ProblemsEngine SpecificationsDimensions ChassisFerris Limited Warranty Tractor Mower Deck