Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper S150X Series, 5900686, 5900696, 5900697, 5900665 manual Check Tire Pressures, Seat Adjustment

Models: S150X Series 5900696 5900686 5900697 5900665

1 49

Download 49 pages 44.52 Kb

Page 19

Check Tire Pressures

Tire pressure should be checked periodically, and maintained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.

Tire	Pressure
Front	25 psi (1,72 bar)

Rear	15 psi (1,03 bar)

Seat Adjustment

See Figure 4. The seat can be adjusted forward and backward. Move the lever towards the left, position the seat as desired, and release the lever to lock the seat into position.

Seat Adjustment (Suspension Seat)

See Figure 5. In addition to the forward and backward seat adjustment, models equipped with a suspension seat can be adjusted for lumbar support, suspension and back angle.

Forward and Backward Adjustment:

Move the forward / backward seat adjustment lever (A, Figure 5) away from the seat, position the seat as desired, and release the lever to lock the seat into position.

Lumbar Adjustment:

Turn the lumbar adjustment knob (B) until the desired amount of lumbar is achieved.

Back Angle Adjustment:

Turn the back angle adjustment knob (C) until the desired amount of back angle is achieved.

Suspension Adjustment:

Turn the suspension adjustment knob (D) until the display scale has a reading that matches the weight of the operator.

Operation

Figure 3. Checking Tire Pressure

A

Figure 4. Seat Adjustment

A. Seat Adjustment Lever

B

A

C

D

Figure 5. Suspension Seat Adjustment

A.Forward / Backward Seat Adjustment Lever

B.Lumbar Adjustment Knob

C.Back Angle Adjustment Knob

D.Suspension Adjustment Knob

Operation

17

Image 19

Snapper S150X Series, 5900686, 5900696, 5900697, 5900665 manual Check Tire Pressures, Seat Adjustment

Contents

Description Briggs & Stratton Yard Power Products GroupModel Number Date Purchased Table of Contents Read the Manual Operator SafetySafety Rules and Information Operating Safety Thrown Objects Slope OperationMoving Parts Retaining WALLS, DROP-OFFS, and Water Roll BAR USEOverhead Obstacles Enclosed Areas Fuel and Maintenance Preparation TrainingOperation Periods of exposure Towed Equipment RIDE-ON UnitsEmissions Ignition System Gasoline Models Maintenance and Storage Service and MaintenanceSafe Handling of Gasoline Operational Warnings Roll BAR Instructions Inspection and Maintenance of the Roll BAR Seat Belt This unit has been designed and manufactured to provide Safety Decals North American Safety Icons Safety Interlock SystemOperational Safety Checks Safety Icons Identification Numbers Features and Controls Control Functions Features and ControlsSeat Adjustment Lever Ignition Switch Features & Controls Operation General Operating SafetyChecks Before Starting Check Tire Pressures Seat Adjustment Foot Pedal Adjustment Mowing Height AdjustmentTo adjust pedal position To Lower the Roll Bar Lower the roll bar only when necessary and Never remove itRaise and Lower the Roll Bar Keep roll bar in the raised position and use the seat belt Stopping the Rider Starting the EnginePushing the Rider By Hand Forward Travel Practice Zero Turn Driving PracticeForward Reverse Travel Executing Turns Practice Turning Around a CornerPractice Turning In Place Executing an End-Of-Row Zero Turn Tall Grass Requires Incremental Cutting MowingMowing Recommendations Height of Grass Mowing Methods Engine Speed & Ground Speed for Mulching Attaching a TrailerProper Mulching Mulching Requires Excellent Mowing Conditions Hours Fall Check Rider / Mower for loose hardware Regular MaintenanceMaintenance Schedule Safety Items Before Every Spring Change Oil & Filter Engine MaintenanceChecking / Adding Fuel Fuel Filter Lubricating the Front Casters LubricationGrease Oil Change Hydraulic Oil Filter Check Hydraulic Oil LevelChange Interval Every 250 Hours Filter Part Number Inspecting the Mower Blades Servicing The Mower BladesNever weld or straighten bent mower blades Balancing the Mower Blade Nail Reinstalling the Mower Blades Speed Balancing Adjustment Ground Speed Control Lever Adjustment Parking Brake Adjustment Neutral Adjustment Return-to-Neutral Adjustment Deck Leveling Adjustment Deck Rod Timing Adjustment To avoid damaging belts, do not PRY Belts Over Pulleys Mower Belt Replacement Use extreme caution when removing this spring Hydraulic Pump Drive Belt Replacement Battery Maintenance Jump Starting With Auxiliary Booster Battery Battery ServiceChecking Battery Voltage Charging a Completely Discharged Battery Make Certain Vehicles do not Touch Starter Switch Jumper Cable StartingVehicle Battery Jumper Cable To Ground Engine Block This HOOK-UP for Negative Ground Vehicles Long Term Storage Longer Than 30 Days StorageStarting After Long Term Storage Temporary Storage 30 Days Or Less Troubleshooting the Rider Troubleshooting ChartProblem Cause Remedy Troubleshooting Troubleshooting Common Cutting Problems Troubleshooting Chassis SpecificationsDimensions Engine Ferris Limited Warranty Mower Deck Tractor