Regular Maintenance

 

Lubrication

 

Lubricate the unit at the locations shown in Figures 20

 

through 23 as well as the following lubrication points.

 

Grease:

 

• front caster wheel axles & yokes

 

• deck lift pivot blocks

 

• mower deck spindles

 

• mower deck idler arm

 

Use grease fittings when present. Disassemble parts

 

to apply grease to moving parts when grease fittings are not

Figure 20. Deck Lubrication

installed.

 

Not all greases are compatible. Red Grease (p/n 5022285) is recommended, automotive-type high-temperature, lithium grease may be used when this is not available.

Oil:

• control handle pivots

 

• seat plate pivots

 

• deck lift pivots

 

• discharge chute hinge

 

Generally, all moving metal parts should be oiled where

Figure 21. Con rol Handle Pivots & Seat Plate Pivots

contact is made with other parts. Keep oil and grease o

 

belts and pulleys. Remember to wipe fittings and surfaces

clean both before and after lubrication.

 

orf

 

 

 

 

Lubricating the Front Casters:

 

 

 

 

 

 

 

 

NOTE: Front casters should be lubricated annually.

 

 

 

 

 

 

1.

Remove the 1/4-28 bolt (A, Figure 23) screwed into the

 

 

 

 

Not

 

 

 

 

front caster and install a 1/4-28 grease fitting.

 

 

 

2.

Grease the front caster.

 

 

 

 

3.

Remove the 1/4-28 grease fitting and r install the 1/4-28

 

 

 

bolt.

 

 

 

 

4.

Repeat process for the other side of the machine.

 

 

 

 

 

 

 

 

 

ReproductFigure 22. ioDeck LiftnLinkage Pivots

A

Figure 23. Front Caster & Wheel

A. 1/4-28 Bolt

24

www.Snapper.com