Snapper 7555, 8560 manual Features& Controls, Control Locations

Features& Controls

CONTROL LOCATIONS

The information below briefly describes the function of individual controls. Starting, stopping, and driving require the

combined use of several controls appfied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.

_1_ Speed Selector

Selects forward speeds 1-5 and reverse speeds 1-2.

Traction Control / Free Hand TM Lock

Engages traction drive to wheels when depressed. Also locks auger control when depressed simultaneously. Releasing the traction control lever releases the Free Hand TM auger control lock and stops the drive wheels.

_._ Auger Control

Engages the auger/impeller when depressed. Releasing the control stops the auger/impeller.

r_ Fuel

Fuel tank filler cap (see illustration). Note: The fuel shut off valve is located under the fuel tank. Close the valve when the snowthrower is not in use. Open the valve before starting.

r_ Starter Handle

Used to pull-start the engine.

EPrimer Button

Primes carburetor for faster cold starting.

Chute Direction Control

Rotates the discharge chute to desired position.

5_ Chute Deflector Knob

Locks chute deflector in desired position.

Traction Lock Pins

The traction drive to each wheel can be locked and unlocked with the Traction Lock Pins (H, Figure 4) to per- mit the unit to "free-wheel," allowing easier manual han- dling and transport of the snowthrower.

r_ Electric Start Button (Optional)

Activates electric starter.

_!_1 Throttle Lever

Controls engine speed. Move toward the hare icon for faster engine speed, move toward the turtle icon for slower engine speed. Move the throttle all the way to STOP to stop the engine.

_ Engine Key

Prevents starting of engine without key. Stops engine

when removed.

WChoke Knob

Adjusts air/fuel mix for easier cold weather starting.

9