Stnrage

LUBRICATION CHECK / LUBRICATE

FREE-HAND LINKAGE

Check the function of the Free-Hand controls: the con- trols should function as described in the CONTROLS

section. It is critical for the safe operation of the unit that the controls disengage when released.

If the controls do not function properly, lubricate them. If

lubrication does not rectify the problem, see your dealer. Under no circumstances should the unit be used if the

controls are not functioning properly.

Figure 17. Lubricate Free Hand Control

IMPORTANT NOTE

It is very important that grease fittings on the auger shaft are lubricated regularly. If auger rusts to shaft, damage to worm gear may occur if shear pins do not break.

LUBRICATING THE AUGER SHAFT &

ASSEMBLY

1.Remove cotter pin (C, Figure 18) and shear pin (B).

2.Use a grease gun and squirt several shots of grease into grease fitting (A).

3.Rotate auger assembly (D) several times to distribute the grease evenly. Repeat step 2.

4.Reinstall shear pin (B) and cotter pin (C).

5.Repeat procedure for other side.

STORAGE

WARNING

Never store the unit (with fuel) in an enclosed, poorly ventilated structure. Fuel vapors can travel to an ignition source (such as a furnace, water heater, etc.) and cause an explosion.

Fuel vapor is also toxic to humans and animals.

Before you store your unit for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, then perform the following steps:

Disengage the PTO, set the parking brake, and remove the key.

Perform engine maintenance and storage measures listed in the engine owner's manual. This includes draining the fuel system, or adding stabilizer to the fuel (do not store a fueled unit in an enclosed struc- ture - see warning).

Figure 18. Checking Auger Gear Case Lubrication

A.

Grease

Fittings

C.

Cotter

Pins

B.

Shear

Pins

D.

Auger

Assembly

Before starting the unit after it has been stored:

Check all fluid levels. Check all maintenance items.

Perform all recommended checks and procedures found in the engine owner's manual.

Allow the engine to warm up for several minutes before use.

19

Page 20
Image 20
Snapper 7555, 8560 Stnrage, Lubrication Check / Lubricate FREE-HAND Linkage, Lubricating the Auger Shaft Assembly, Storage

8560, 7555 specifications

The Snapper 7555 and 8560 are robust and efficient riding lawn mowers designed to deliver optimal performance in both residential and commercial landscaping. These models are equipped with advanced features and technologies that make lawn care easier and more effective.

One of the standout features of the Snapper 7555 and 8560 is their powerful engine performance. Both models are powered by reliable Briggs & Stratton engines, ensuring that they deliver the necessary power for mowing even the toughest grass types. The Snapper 7555 has a 22-horsepower engine, while the 8560 boasts a more powerful 25-horsepower engine, allowing them to tackle larger yards and more challenging terrains.

The cutting decks on both models are designed for precision and durability. The Snapper 7555 comes with a 55-inch cutting deck, while the 8560 features an impressive 60-inch deck, enabling quicker and more efficient mowing sessions. Both decks are crafted from a heavy-duty steel material that provides lasting durability and a clean cut, even in thick grass. The adjustable cutting heights further enhance their versatility, allowing users to select the perfect height for their lawn.

In terms of technology, both models come equipped with the innovative "Cargo" feature, providing additional storage for tools and supplies. This practical addition makes it easy for users to carry whatever they need while mowing or performing lawn maintenance tasks. The easy-to-use controls and comfortable seating ensure that users can enjoy a smooth and ergonomic mowing experience without fatigue.

Another notable characteristic of these Snapper models is the easy maintenance feature. With a simple design that allows for easy access to the engine and cutting deck, routine maintenance such as oil changes, blade sharpening, and belt inspections can be performed quickly and efficiently.

Additionally, both the Snapper 7555 and 8560 include Snapper’s patented "Pivoting Front Axle," which enhances maneuverability and traction on uneven terrains. This technology helps to maintain consistent contact with the ground while minimizing the risk of scalping the grass.

In summary, the Snapper 7555 and 8560 represent a blend of power, efficiency, and user-friendly features. With their robust engines, durable cutting decks, and innovative technologies, these riding lawn mowers are designed to meet the diverse needs of homeowners and professional landscapers alike, making them an excellent investment for anyone looking to enhance their lawn care experience.