Snapper 7800390, 7800388, 7800391 Uncrating, Axion / 150Z Series, Important Note, Do Not Tow Rider

Axion / 150Z Series

Uncrating

1.Using a reciprocating utility saw or equivalent, cut crate away from bottom skid. Remove crate. Remove plastic wrap.

2.Cut any banding securing the unit.

IMPORTANT NOTE

When cutting crate from bottom skid, use caution around tires and mower rollers.

3.Locate the transmission release levers (C, Figure 1) at the rear of the unit.

4.Pull both levers back and down to release the trans- missions (position B, Figure 1).

5.Pull the ground speed control levers in to their DRIVE positions, and disengage the parking brake.

The rider can now be pushed by hand.

6.After moving the rider, set the ground speed control levers to START/PARK, engage the parking brake, and push both transmission release levers forward to re-engage the transmissions (position A, Figure 1).

DO NOT TOW RIDER

Towing the unit will cause transmission dam- age. Do not use another vehicle to push or pull this unit. Do not use this unit to push or pull another vehicle or object.

A

B

C

Figure 1. Pushing the rider

8/2008 7 TP 300-5412---ZT-SN