IMPORTANT SAFETY INSTRUCTIONS

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity or judgment. If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER Products Inc., McDonough, Georgia 30253. Phone: (1-800-935-2967).

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine. Never assume that children will remain where you last saw them.

1.KEEP children out of the mowing area and under the watchful care of a responsible adult other than the operator.

2.DO NOT allow children in yard when machine is operated (even with the blade OFF).

3.DO NOT allow children or others to ride on machine, attachments or towed equipment (even with the blades OFF). They may fall and be seriously injured.

4.DO NOT allow pre-teenage children to operate machine.

5.ALLOW only responsible adults & teenagers with mature judgment under close adult supervision to operate machine.

6.DO NOT operate blades in reverse. STOP BLADES. LOOK and SEE behind and down for children, pets and hazards before and while backing.

7.USE EXTRA CARE when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

PROTECTION AGAINST TIPOVERS

(Continued From Previous Column)

5.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

6.KEEP A SAFE DISTANCE (at least 3 feet) away from edge of ditches and other drop offs. The machine could turn over if an edge caves in.

7.Always begin forward motion slowly and with caution.

8.Use weights or a weighted load carrier in accordance with instructions supplied with a grass catcher. DO NOT operate machine on slopes exceeding 10 degrees (18% grade) when equipped with grass catcher.

9.DO NOT put your foot on the ground to try to stabilize the machine.

10.DO NOT operate machine on wet grass. Reduced traction could cause sliding.

11.Chose a low enough speed setting so that you will not have to stop or shift on a slope. Tires may lose traction on slopes even though the brakes are functioning properly.

12.DO NOT operate machine under any condition where traction, steering or stability is doubtful.

13.Always keep the machine in gear when going down slopes. DO NOT shift to neutral (or actuate hydro roll release) and coast downhill.

PROTECTION AGAINST TIPOVERS

Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. All slopes require extra CAUTION. If you cannot back up the slope or if you feel uneasy on the slope, DO NOT mow it. Use extra care with grass catchers or other attachments; these affect the handling and the stability of the machine.

1.DO NOT operate machine on slopes exceeding 15 degrees (27% grade).

2.Exercise EXTREME CAUTION on slopes above 10 degrees (18% grade). Turn blades OFF when traveling uphill. Use a slow speed and avoid sudden or sharp turns.

3.DO NOT operate machine back and forth across face of slopes. Operate up and down. Practice on slopes with blades off.

4.AVOID starting, stopping or turning on slopes. If machine stops going uphill or tires lose traction, turn blades OFF and back slowly straight down the slope.

PREPARATION

1.Read, understand, and follow instructions and warnings in this manual and on the machine, engine and attachments. Know the controls and the proper use of the machine before starting.

2.Only mature, responsible persons shall operate the machine and only after proper instruction.

3.Data indicates that operators age 60 and above, are involved in a large percentage of mower-related injuries. These operators should evaluate their ability to operate the mower safely enough to protect themselves and others from serious injury.

4.Handle fuel with extra care. Fuels are flammable and vapors are explosive. Use only an approved fuel container. DO NOT remove fuel cap or add fuel with engine running. Add fuel outdoors only with engine stopped and cool. Clean spilled fuel from machine. DO NOT smoke.

5.Practice operation of machine with BLADES OFF to learn controls and develop skills.

6.Check the area to be mowed and remove all objects such as toys, wire, rocks, limbs and other objects that could cause injury if thrown by blade or interfere with mowing.

Page 1 Page 3
Page 2
Image 2
Snapper HZT21480BV, CZT19480KWV Protection for Children, Protection Against Tipovers, Preparation, From Previous Column
Page 1 Page 3

HZT21480BV, CZT19480KWV, CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV specifications

The Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV, and HZT21480BV represent a lineup of advanced zero-turn lawn mowers designed for both residential and commercial users. These models are renowned for their robust performance, user-friendly features, and technological innovations that enhance mowing efficiency and comfort.

One of the standout features of these Snapper models is their powerful engine options. The CZT19480KWV and CZT19481KWV are equipped with dependable Kawasaki engines, delivering exceptional torque and speed for tackling dense grass with ease. Similarly, the HZT21480BV and HZT21481BV models are powered by reliable Briggs & Stratton engines, ensuring consistent performance under various mowing conditions.

The zero-turn capability is a defining characteristic of these mowers, allowing for unparalleled maneuverability. This feature enables operators to navigate tight spaces and obstacles with minimal effort, resulting in a pristine cut and reduced mowing time. The precision steering controls enhance the operator's ability to make sharp turns while maintaining a consistent cutting height.

Comfort is prioritized in the design of these models. The mowers come with ergonomic seating, providing substantial back support for extended mowing sessions. Additionally, the adjustable steering levers allow users to customize their driving position, contributing to a comfortable and efficient mowing experience.

In terms of cutting performance, the Snapper models boast high-quality cutting decks, ranging from 48 to 52 inches, made of durable steel. The decks are engineered for a clean cut and can efficiently handle various grass types and heights. The mowing height is easily adjustable, offering multiple settings to accommodate different lawn conditions.

Technologically, these mowers incorporate advanced features like an intuitive control panel, easy-start ignition systems, and optional accessories, such as mulching kits and baggers, providing versatility for lawn care needs. Furthermore, the Snapper Quick Turn technology enhances the overall efficiency, cutting down the time spent mowing while ensuring even grass distribution.

In summary, the Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV, and HZT21480BV combine power, precision, and comfort, making them ideal choices for users seeking reliable and efficient zero-turn mowers. Whether for residential lawns or commercial landscaping, these models offer the performance and features that meet the demands of any mowing task.
Top Page Image Contents