Snapper HZT21480BV, CZT19480KWV Problem Probable Cause, Corrective Action

Models: HZT21480BV, CZT19480KWV CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV

1 40
Download 40 pages 49.01 Kb
Page 28
Image 28

TROUBLESHOOTING

PROBLEM

 

PROBABLE CAUSE

Starter Will Not Crank

1. Battery dead.

Engine

2. Blown fuse.

 

3.

Electrical connections loose or corroded.

 

4.

Defective ignition switch.

Engine Will Not Start

1. Blade engagement switch in the “ON” position.

 

2.

Park brake not set or Operator not seated.

 

3.

Motion Controls not in Neutral Lock Position.

 

4.

Fuel tank empty.

 

5.

Engine needs choking.

 

6.

Spark plug wire disconnected.

 

7.

Battery weak or dead.

 

8.

Faulty parking brake, blade or ignition switch.

Engine Stalls After

1. Operator not in seat.

Running

2. Choke control in the “CHOKE” position.

3.Fuel tank empty.

4.Engine air pre-cleaner and or air cleaner dirty.

5.Spark plug defective or gap set improperly.

6.Fuel filter stopped up.

7.Water, debris or stale fuel in fuel system.

Engine Loses Power 1. Excessive load on engine.

 

2.

Engine air pre-cleaner or air cleaner dirty.

 

3.

Engine oil level low.

 

4. Engine cooling fins & air intake screen excessively dirty.

 

5.

Spark plug faulty.

 

6.

Water, debris or stale fuel in fuel system.

Engine Backfires When

1. Throttle control set too “FAST”.

Turned To “STOP”

 

 

Excessive Vibration

1. Damaged or bent mower blades.

 

2.

Loose blade components.

 

3.

Worn or damaged components.

 

4.

Loose or missing air lift (if equipped).

CORRECTIVE ACTION

1.Service battery.

2.Replace fuse.

3.Clean and check connections for good contact.

4.Contact authorized SNAPPER dealer.

1.Move blade engagement switch to “OFF”.

2.Set park brake and Operator in Operator Seat.

3.Place Motion Controls in Neutral Lock Position.

4.Fill fuel tank with fresh fuel or switch tanks.

5.Move choke control to “CHOKE” position.

6.Place spark plug wire onto spark plug.

7.Service battery.

8.Contact authorized SNAPPER dealer.

1.Sit in operator’s seat.

2.Move choke control to “OFF” position.

3.Fill with fuel to proper level or switch tanks.

4.Clean free of all debris.

5.Service spark plug.

6.Replace fuel filter.

7.Drain and clean fuel system.

1.Lessen load.

2.Clean or replace filters.

3.Fill with engine oil to proper level.

4.Clean cooling fins, air intake screen of all debris.

5.Service spark plug.

6.Drain and clean fuel system.

1.Set throttle control to “SLOW” and allow engine to idle. Then, turn key to “OFF”.

1.Service mower blade(s).

2.Service and tighten loose parts.

3.Inspect all belts and pulleys.

4.Replace air lifts. Tighten to proper torque.

(Trouble Shooting Continued on Next Page)

28

Page 28
Image 28
Snapper HZT21480BV, CZT19480KWV Problem Probable Cause, Corrective Action, Trouble Shooting on Next

HZT21480BV, CZT19480KWV, CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV specifications

The Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV, and HZT21480BV represent a lineup of advanced zero-turn lawn mowers designed for both residential and commercial users. These models are renowned for their robust performance, user-friendly features, and technological innovations that enhance mowing efficiency and comfort.

One of the standout features of these Snapper models is their powerful engine options. The CZT19480KWV and CZT19481KWV are equipped with dependable Kawasaki engines, delivering exceptional torque and speed for tackling dense grass with ease. Similarly, the HZT21480BV and HZT21481BV models are powered by reliable Briggs & Stratton engines, ensuring consistent performance under various mowing conditions.

The zero-turn capability is a defining characteristic of these mowers, allowing for unparalleled maneuverability. This feature enables operators to navigate tight spaces and obstacles with minimal effort, resulting in a pristine cut and reduced mowing time. The precision steering controls enhance the operator's ability to make sharp turns while maintaining a consistent cutting height.

Comfort is prioritized in the design of these models. The mowers come with ergonomic seating, providing substantial back support for extended mowing sessions. Additionally, the adjustable steering levers allow users to customize their driving position, contributing to a comfortable and efficient mowing experience.

In terms of cutting performance, the Snapper models boast high-quality cutting decks, ranging from 48 to 52 inches, made of durable steel. The decks are engineered for a clean cut and can efficiently handle various grass types and heights. The mowing height is easily adjustable, offering multiple settings to accommodate different lawn conditions.

Technologically, these mowers incorporate advanced features like an intuitive control panel, easy-start ignition systems, and optional accessories, such as mulching kits and baggers, providing versatility for lawn care needs. Furthermore, the Snapper Quick Turn technology enhances the overall efficiency, cutting down the time spent mowing while ensuring even grass distribution.

In summary, the Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV, and HZT21480BV combine power, precision, and comfort, making them ideal choices for users seeking reliable and efficient zero-turn mowers. Whether for residential lawns or commercial landscaping, these models offer the performance and features that meet the demands of any mowing task.