Snapper LT160H42GBV, 2LT160H42GBV2, LT180H48GBV2 Annually END of Each Season, Engine, Fuel Filter

Section 3 - MAINTENANCE

3.4ANNUALLY (END OF EACH SEASON)

Perform all maintenance as described in Section “SERVICE - EVERY 25 OPERATING HOURS”. Also see Service Schedule.

3.4.1. ENGINE

1.Service engine according to engine owner's manual.

3.4.2.FUEL FILTER

1.Service fuel filter as instructed below, on COLD ENGINE ONLY!

NOTE: It may be necessary to drain the fuel tank before removing fuel filter to prevent spillage of gasoline.

2.Locate fuel filter. Remove hose clamps and fuel hoses from both sides of fuel filter.

3.Install new fuel filter part number 1-4359. See Figure 3.11.

NEW FUEL FILTER

PART NUMBER 1-4359

FIGURE 3.11

4.Fill fuel tank with fresh gasoline. Refer to engine owner's manual for fuel specifications.

3.4.3.SPARK PLUG

Remove and replace engine spark plug. Refer to engine owner's manual for correct replacement plug and gap specifications.

3.4.4.HYDROSTATIC TRANSMISSION OIL

The hydrostatic transmission does not require maintenance. If any problems arise return immediately to a Snapper dealer.

15