A |
B |
Figure 13: Automatic drive disconnect
A - Automatic drive disconnect DRIVE position B - Automatic drive disconnect PUSH position
How to Set the Parking Brake
1.Completely push the brake pedal forward.
2.Lift the parking brake lever (Figure 14).
3.Remove your foot from the brake pedal and then release the parking brake lever. Make sure the parking brake will hold the unit.
4.To release the parking brake, completely push the brake pedal forward. The parking brake will automatically release.
WARNING: Before you leave the operator’s position, move the speed control pedal to the neutral (N) position. Set the parking brake. Move the blade rotation control to the DISENGAGE position. Stop the engine and remove the ignition key.
B |
A |
Figure 14: Parking brake
A - Brake pedal
B - Parking brake lever
English
How to Change the Cutting Height
To change the cutting height, raise or lower the deck ift lever as follows:
1.Move the deck lift lever forward to lower the mower housing and back to raise the mower deck (Figure 15).
2.When you ride on a sidewalk or road, move the deck lift lever to the highest position and disengage the blades (Figure 10).
A |
Figure 15: Lift control
A - Deck lift lever
How to Stop the Unit
1.Slowly remove your foot from the speed control pedal. The speed control pedal will automatically return to the NEUTRAL position and the unit will stop.
2.Move the blade rotation control to the DISENGAGE position.
3.Set the parking brake.
WARNING: Make sure the parking brake will hold the unit.
4.Move the throttle control to the SLOW position.
5.To stop the engine, turn the ignition key to the OFF position. Remove the key.
en
17
