Snapper LT23460AWS specifications Storage over 30 days

Models: LT23460AWS

1 48
Download 48 pages 13.19 Kb
Page 39
Image 39

Storage (over 30 days)

At the end of each year, prepare the unit for storage as follows.

The Engine

For storage information, see the the engine manufacturer’s instructions.

The Battery

1.Remove the battery.

2.Clean the battery terminals of any deposits.

3.Charge the battery. See the instructions on “How To Prepare And Charge The Battery”.

4.Store the battery in a cool, dry place.

NOTE: After a long time in storage, charge the battery.

The Fuel System

WARNING: Do not drain the gasoline inside a building or near a fire. Do not smoke because the fumes from the fuel can cause an explosion.

1.Start the engine.

2.Run the engine until the fuel tank and the carburetor are out of fuel and the engine stops.

3.After storage, make sure you use fresh fuel.

Clean the Unit

1.Clean the dirt and grass from the engine.

2.Clean the mower housing.

Lubricate the Unit

See the “Lubrication” instructions in this book.

English

en

39

Page 39
Image 39
Snapper LT23460AWS specifications Storage over 30 days