Snapper NZMJ23522KH, NZMJ25612KH Familiarization, Introduction, Nomenclature

Section 1 - FAMILIARIZATION

HOUR

METER

CHOKE CONTROL

MOTION CONTROL LEVER

RIGHT HAND

FUEL TANK

DECK LIFT

LEVER

DISCHARGE

DEFLECTOR

CHOKE	BLADE
		KEY
CONTROL	SWITCH
		SWITCH

ENGINE SPEED

ENGINECONTROL

SPEED

OPERATOR’S

SEAT

LEFT HAND

FUEL TANK

PARKING BRAKE LEVER

CONTROL PANEL (SEE INSET)

DECK LIFT PEDAL

IMPORTANT

The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions

1.1 INTRODUCTION

This manual has been prepared for the operator’s of the SNAPPER MID MOUNT Z-RIDER. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices. Read, Understand and Follow the IMPORTANT SAFETY INSTRUCTIONS on Pages 2 thru 4 of this manual and All SAFETY messages on the MID MOUNT Z-RIDER and its attachments before operating. SNAPPER recommends returning the MID MOUNT Z-RIDER to an authorized SNAPPER dealer annually for inspection and addition of any new devices which might upgrade the safety of the mower.

1.2 NOMENCLATURE

The nomenclature information above shows the essential parts of the SNAPPER MID MOUNT Z- RIDER. It is recommended that all operators of this equipment become thoroughly familiar with the controls, components, and operation of this machine before operating. Specific details involving the engine are found in the separate engine owner’s manual. Study these manuals before operating and keep both handy for future reference. For the nearest SNAPPER dealer in your area, check the yellow pages under the heading LAWN MOWERS. For engine parts and service, look for the engine manufacturer’s dealers under the heading, ENGINES - gasoline.

6