Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper SPV21675FC, SPV21675EFC Handle Height Adjustment, Stopping, Propelling the Mower

Models: SPV21675FC, SPV21675EFC SPV21675EFC (7800266), SPV21675FC (7800265)

1 24

Download 24 pages 38.81 Kb

Page 8

Operation

Operation

Starting and Operation (Continued)

Propelling the Mower

1.Start the engine. Refer to the Section entitled “Starting and Operation – Engine and Blade”.

2.Begin squeezing the wheel drive control (A, Figure 4) back toward the handle to engage the wheel drive and propel the mower forward. Forward speed can be increased by squeezing the wheel drive control further back toward the handle.

A

Figure 4: Wheel drive control

(Components removed for clarity)

Handle Height Adjustment

The height of the mower handle can be adjusted as follows:

1.Turn the two locking cams (A, Figure 5) a quarter-turn to unlock the handle assembly (B).

2.Align the handle assembly with one of the three handle height adjustment holes (C) in the mounting brackets.

3.Return the locking cams to their original position to lock the handle.

C

A

B

Figure 5: Adjusting the handle height

Stopping

1.Stop forward motion of the mower by releasing the wheel drive control.

2.Stop the engine and blade by releasing the blade control.

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

6	www.snapper.com

Image 8

Snapper SPV21675FC, SPV21675EFC Handle Height Adjustment, Stopping, Propelling the Mower, Starting and Operation Continued

Contents

21” VARIABLE SPEED REAR DISCHARGE WALK BEHIND MOWERS Safety Instructions & Operators Manual forModels SPV21675FC SPV21675EFCPRODUCT REGISTRATION Date of Purchase Retailer Retailers Phone Number EquipmentEngine Snapper at P.O. Box 1379, McDonough, GeorgiaTable of Contents Operator SafetyFeatures and Controls Operation MaintenancePROTECTION FOR CHILDREN SLOPE OPERATIONPREPARATION PREPARATION Continued From Previous ColumnMAINTENANCE AND STORAGE OPERATIONOPERATION Continued From Previous Column IMPORTANT OPERATOR SAFETY INSTRUCTIONS ContinuedFeatures and Controls Features and ControlsPre-Start Check List Starting and OperationEngine and Blade Figure 1 Mower controlsHandle Height Adjustment StoppingPropelling the Mower Figure 5 Adjusting the handle heightCutting Height Adjustment Installing the Discharge DeflectorRecycling Operation Figure 6 Adjusting cutting heightInstalling the Grass Bag Removing the Recycling PlugFigure 11 Installing the grass bag OperationMaintenance - Introduction Service - After First 5 HoursService - Periodic Change Engine OilMaintenance Storage ProcedureWheel Drive Components Mower Blade Replacement Standard Blade Wear LimitBlade Sharpening MaintenanceWheel Drive Control Adjustment MaintenanceFigure 20 Adjusting the transmission spring tension Figure 18 Wheel drive controls Components removed for clarityBelt Service Engine Drive Belt ReplacementMaintenance Note Recommended blade torque is 40 ft. lbsBattery Service New Battery PreparationBattery Service Battery StorageRear Cover Removal and Installation To Install the Rear CoverTo Remove the Rear Cover Figure 24 Removing the rear coverMaintenance Service ScheduleMaintenance/Replacement Parts CORRECTIVE ACTION TroubleshootingPROBABLE CAUSE Warranties 2 YEAR LIMITED WARRANTYDISCLAIMER OF WARRANTY Page Page Page Common Service Parts Product Specifications All21” VARIABLE SPEED REAR DISCHARGE WALK BEHIND MOWERS Part Number