Maintenance - Introduction

To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number.

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

Service - After First 5 Hours

Change Engine Oil

1.Refer to the Engine Manual for proper oil specifications, procedures and proper service intervals.

2.For the simplest/cleanest oil change, simply turn the mower on its side to drain the oil, as shown. Drain the oil through the dipstick tube (A, Figure 13) into a container. Allow sufficient time for all the oil to drain.

Important: Drain the fuel tank before tipping the machine. DO NOT tip the machine with the carburetor or spark plug down. Oil from the crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

A

Figure 13: Draining the engine oil

3.Dispose of drain oil properly.

4.Fill the engine with oil as specified in the Engine Manual. Do Not overfill.

Check Mower Blade

1.Disconnect the spark plug wire and secure the end away from the plug.

2.Tilt the mower up on its rear wheels for access to the blade cap screw (A, Figure 14). Do not tilt the mower with the spark plug or carburetor down.

Important: Drain the fuel tank before tipping the mower. DO NOT tip the machine with the carburetor or spark plug down. Oil from the crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

A

Figure 14: Tightening the blade cap screw

3.Check the torque of the blade cap screw. Recommended torque should be 40 ft. lbs.

4.Check the blade for sharpness, wear and damage. Refer to the Section entitled “Blade Wear Limits”.

Check Engine Drive Belt

1.Visually check the engine drive belt for cracking, fraying, severed or exposed belt strands. If worn or damaged, replace the belt before operating the mower.

Service - Periodic

Perform all maintenance as described in the “Service Schedule” section of this manual.

Engine

Service the engine according to the engine owner’s manual.

Air Filter

Refer to the engine owner’s manual for service instructions.

Engine Oil

Refer to the engine owner’s manual for service instructions.

Maintenance

9

Page 10 Page 12
Page 11
Image 11
Snapper SPV21675EFC (7800266), SPV21675FC (7800265) specifications Maintenance Introduction, Service After First 5 Hours
Page 10 Page 12

SPV21675FC, SPV21675EFC, SPV21675EFC (7800266), SPV21675FC (7800265) specifications

The Snapper SPV21675EFC and SPV21675FC are remarkable additions to the lineup of professional-grade lawn care equipment designed for homeowners and landscapers who value efficiency and precision. These models showcase an array of innovative features and cutting-edge technologies, empowering users to maintain immaculate lawns and gardens with ease.

The SPV21675EFC and SPV21675FC are equipped with a robust 21-inch steel cutting deck, ensuring a durable and reliable performance. This size strikes a perfect balance, making it suitable for both small and medium-sized yards. The steel construction not only enhances the mower's durability but also contributes to a clean and consistent cut across various grass types.

One of the standout features of these mowers is the Smart Choke technology, which simplifies starting the engine. This user-friendly system automatically adjusts the choke position, reducing the need for manual adjustments by the operator. As a result, both novice and seasoned lawn care enthusiasts can enjoy hassle-free starts with minimal effort.

Powered by a reliable 163cc engine, the Snapper SPV21675EFC and SPV21675FC deliver impressive cutting power. This engine is designed for efficiency, providing sufficient torque to handle thick grass and uneven terrain without sacrificing performance. The mowers come with a variable speed self-propulsion system, allowing users to adjust the speed according to their comfort level and mowing conditions.

Another key characteristic is the versatile cutting height adjustment feature. With six different height positions, users can easily tailor the cutting length to suit their lawn's specific needs. This flexibility is essential for achieving the desired appearance and health of the grass.

The Snapper SPV21675 series also features an integrated rear bagging system, allowing for efficient grass collection as you mow. This system promotes a cleaner lawn by minimizing clippings left behind and reducing the need for additional raking or clean-up after mowing.

In summary, the Snapper SPV21675EFC and SPV21675FC mowers offer exceptional features, including a durable steel cutting deck, user-friendly Smart Choke technology, a powerful engine, variable speed capabilities, adjustable cutting heights, and an effective bagging system. These characteristics make them ideal choices for anyone seeking a reliable and efficient lawn care solution. Whether you're a homeowner looking to maintain your yard or a professional landscaper managing multiple properties, the Snapper SPV21675 series will undoubtedly meet and exceed expectations.
Top Page Image Contents