Soehnle 2790 manual Messages, Elimination, Technical data

ENGLISH

✁

✂

Messages

The scale sets the value zero automatically when it is switched on.

The zero range at power- on is -5% ....+15% of the

weighing range.

If the scale is outside the set tolerance range, the display shown adjacent appears.

Elimination

✁Either take the load off the platform or press the

key to activate the cali- brated zero point.

✂There is a mechanical or electrical fault.

77mm

82,6 mm

125 mm 306 mm

Parts weight too small	The scale is not suitable
	for these parts.
Zeroing not possible	The zero limit has been
	exceeded or undershot.
Taring is not possible	Cannot tare the zero
	display or negative values.
Print not permitted on	Place an object on the
	scale / remove an object
over- or underload
	from the scale.
Switch to lbs	Activation is described on
deactivated	Pages 18/19.
	In case of other error mes-
	sages, please contact your
	SOEHNLE service

Technical data

•Housing made of anodised aluminium

•Protection class IP 65, dust-proof and splash-proof.

•Operated by means of a tactile keypad.

•Plug-in power supply 100-240V, 57-63Hz

•Operating temperature -10° ..... +40° C

•Storage temperature -20° ..... +60° C

•Zero range -1 %... +3 % of the weighing range (max.)

•Zero range at power-on -5% ...+15% of the weighing range.

•RS 232 (V24) interface for printer or IT connection. For a description of the interface, please contact your Soehnle service partner.

20

143,7 mm