Soehnle 7701, 7700 Extended functions, Special dialysis function intermediate tare, Hold function

ENGLISH

Extended functions

The key can be programmed with the following functions: Hold, unit switch-over, BMI and special Dialysis function. The standard function programmed is BMI. You can make changes in User mode

(p. 20/21).

•Press the function key .

•Display, e.g. 170 = body height in cm

•	Body height > 170cm: Press		key until body
	height is correct.
•	Body height < 170cm: Press		key until body
	height is correct.
•	Confirm by pressing	.
•	Display switches to weighing mode 0.00 kg.
•	Weighing.
•	After the scales have stopped moving, the display
	shows the BMI and weight alternately.

BMI classification (as per DGE - German Society for Nutrition, Nutrition Report 1992)

Classification
Underweight	< 20	< 19
Normal weight	20 - 25	19 -24
Overweight	25 - 30	24 -30
Adiposity	30 - 40	30 - 40
Severe adiposity	> 40	> 40
	Special dialysis function (intermediate tare)
	If this function is set, the operator may give the
	patient a blanket or a book or remove them without
	affecting the weight reading.
	Press the key. "Hold" appears in the display. Give
	or take back book and press	again. Previous
	weight reading will be displayed without Hold but with
	"N". The reading is now a net weight. The tare is sto-
	red in the tare memory.
	Hold function
	When this mode is active, press the key. "Hold"
	flashes until the value is determined and frozen.
	These 6 modes are settable in User mode:

Mode	Hold	Remove by pressing
Manual	At a standstill outside	key
Automatic	the zero range	Remove load from scale
Slave pointer,		key
manual	For weight increase
Slave pointer,	and repeated standstill	Remove load from scale
automatic
Maximum value,	of the maximum	key
manual
	weight reached
Maximum value,		Remove load from scale
	(without being at a standstill)
automatic

19