Soehnle 9320 manual Power supply, Disposing of the scale, Getting Started

PB

ENGLISH

Power supply

The scale can be operated on mains power or using the built-in battery. The battery can be recharged using the plug-in power adapter. Dispose of defective batteries in accordance with the national and local regulations for environmental protection and recycling.

Disposing of the scale

This product is not to be treated as regular household waste, but should be handed in to an electrical/electronic equipment recycling centre. You can obtain further details from your local council, your municipal waste disposal com- pany or the firm from which you purchased the product.

Getting Started

Unpack all parts::

•Scale

•Platform

•Power cord

•Sealing plug

1.Place the scale on the table with the base facing upwards.

2.Remove the transport restraint from the base using a screwdriver (should be stored together with the packa- ging). Seal with the plug.

3.Remove the protective foil.

230 VAC

4. Check the mains voltage. ! 50/60 Hz

10 Watt

5.Connect the power cord.

The battery should be charged for at least 12 hours before putting the scale into operation.

During the charging process, an LED lights up.

6.Install the scale at the point of application.

7.Align the scale horizontally using the adjustable feet and spirit level.

8.The scale is ready for operation.

11