Power-on, Setting the backlighting mode, Zero

On/Off switch bottom left

9320

ENGLISH

Power-on

Only when the scale is not loaded.

After the test routine, the display is set to zero. The scale is ready for use.

Place the weighing product on the scale.

The display shows the gross weight.

The measured values stabilise after a short warm-up peri- od of 15 minutes after power-on. Place the weighing pro- duct carefully on the scale. Do not keep any loads perma- nently on the platform.

Avoid shocks and loading the scale beyond specified maximum load.

These could damage the scale.

Setting the backlighting mode

Press the key.

The function toggles between the operating states > Off > Active in weighing mode > Continuous mode.

If the backlight is continuous mode, the scales only approx. 30% of the possible battery service time.

Zero

If zero is not indicated when the scale is unloaded, press

the key.

Possible zero range -2 % ... +2 % of the weighing range.

Tare weighing

Place a container on the platform and press the key.

The display is reset to zero and Net is displayed.

Place the weighing product on the scale. After the display settles, the net weight of the weighing product is display- ed.

Clear tare: when the scale is empty, press the key.

Totalising

Weight values > min. area or piece number can be stored

in the total memory by pressing the

key. Max. 9999

totalising operations are possible, but only up to a six-digit value. The M+ symbol is displayed after the first totalising operation. To perform further totalising operations, empty the scale, place the next weight on the scale and press

the

key again. Press

to display the total. The

number of totalising operations appears first, followed by the value.

Clear total: press the and keys one after another.

Soehnle 9320 manual Power-on, Setting the backlighting mode, Zero, Tare weighing, Totalising

Models: 9320