Soleus Air GH-PAC-10E5 manual Control Panel, Display, & Operating Instructions

POWER BUTTON

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL & LED DISPLAY

	COOL MODE LIGHT		DRY MODE LIGHT
BUCKET FULL LIGHT		LED DISPLAY
				FAN MODE LIGHT

REMOTE RECEIVER

MODE BUTTON

TEMP SELECT BUTTONS

CONTROL PANEL OPERATING INSTRUCTIONS

1)Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER button once more to turn the unit off.

2)Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air Condi- tioner, Dehumidifier, and Fan only mode. Each press of the MODE button will light up a different icon on the control panel. The exhaust hose and window kit must be installed when the unit is in Air Conditioner or Dehumidifier mode. When using the unit as a fan, it is not necessary to keep the exhaust hose and window kit connected to the unit.

3)Temperature - Select the desired temperature by pressing either - or + key when using the unit in cooling mode. The digital thermostat will display the set temperature.

4)Louver Direction - This unit has 4-Way directional louvers. Use the louver guides to direct air where cooling or fanning is needed most.

5)Bucket Full - When the unit cannot evaporate the collected moisture fast enough. The excess water will collect in a backup water tank located inside the unit. The bucket full icon will light up if this occurs

8