Soleus Air KC-18U, KC-25U, KC-32U To clear Timer delay program, To see the remaining time in hours

Press the minus TEMP button to lower the temperature. The Set indicator light will turn on. Each time you press or hold the minus TEMP button, the temperature will go down 1º until it reaches 64°F (18°C).

NOTE: After 3 seconds, the Set indicator light will turn off and the display will show the current room temperature.

Timer Delay

To set the Timer for a 1 to 24-hour delay until the air conditioner turns off (the air conditioner must be On):

1.Press TIMER. Indicator light will flash.

2.Press the plus or minus TEMP button to change the delay time from 1 to 24 hours.

3.Press TIMER again or wait 10 seconds. Indicator light will remain on.

To set the Timer to turn on the air conditioner, keeping previous settings:

1.Turn off air conditioner.

2.Press TIMER. Indicator light will flash.

3.Press the plus or minus TEMP button to change delay time (1to 24 hours).

4.Press TIMER again or wait 10 seconds. Indicator light will remain on.

To set the Timer to turn on the air conditioner, changing the previous settings:

1.Turn air conditioner on.

2.Adjust Mode to Cool, Fan Only, or Power Saver.

3.Adjust Fan Speed to Turbo, High or Low, or Auto.

4.Adjust temperature between 64°F (18ºC) and 86°F (30ºC).

5.Turn off air conditioner.

6.Press TIMER. Indicator light will flash.

7.Press the plus or minus TEMP button to change delay time (1to 24 hours).

8.Press TIMER again or wait 10 seconds. Indicator light will remain on.

To clear Timer delay program:

NOTE: Air conditioner can be either on or off.

Press and hold TIMER for 3 seconds. Indicator light will turn off.

To see the remaining time (in hours):

1.Press TIMER once after it has been programmed.

2.While the display is showing the remaining time, you can press the plus or minus TEMP button to increase or decrease the time.

To operate air conditioner with remote control

COOL FAN FAN

SPEED

Auto	Power
	Saver
	TIMER

POWER

NOTE: Two AAA batteries (included) power the remote control. Replace batteries after 6 months of use, or when the remote control starts to lose power.

To turn the air conditioner on or off:

Press POWER.

POWER

To select the mode:

Press COOL, FAN, or POWER SAVER.

Fan

Cool

Power

Saver

To select the fan speed:

Press FAN SPEED for Turbo, High or Low or AUTO. NOTE: Auto

fan speed cannot be selected in Fan Only mode.

Fan

Speed

Auto

9