Fan Speed

Temperature

Set FAN SPEED to the desired setting. When the air conditioner is operating at Low Cool, High Cool (on some models), Med Cool (on some models) or Turbo Cool (on some models), the fan circulates air continuously.

oTurbo Cool (on some models)—for maximum cooling o High Cool (on some models)—for normal to maximum

cooling (depending on model)

o Med Cool (on some models)—for normal cooling o Low Cool—for sleeping comfort

o Power Saver (on some models)—Fan run only when cooling is needed. Fan and compressor stop running when room temperature matches the Temperature control setting.

o Fan Only—to move air continuously without cooling

FAN CONTROL

Turn the TEMPERATURE control to a mid-setting. Adjust the air conditioner's performance by turning the Temperature control clockwise for maximum cooling. For less cooling, turn the TEMPERATURE control counterclockwise. Experiment to find the setting that suits you best.

Changing Air Direction

You can use the tab, depending on model, to direct the

air right or left. Rotate the whole cartridge to direct air up, down or

straight ahead.

A

A. Tab

A

A. Cartridge

Normal Sounds

When your air conditioner is operating normally, you may hear sounds such as:

Droplets of water hitting the condenser, causing a pinging or clicking sound. The water droplets help cool the condenser.

Air movement from the fan.

Clicks from the thermostat cycle.

Vibrations or noise due to poor wall or window construction.

A high-pitched hum or pulsating noise caused by the modern high-efficiency compressor cycling on and off.

11

Page 11
Image 11
Soleus Air KC-32U, KC-25U, KC-35U, KC-15U, KC-18U owner manual Changing Air Direction, Normal Sounds, Temperature