c)The fan motor of indoor unit runs in low speed
d)When in cooling mode, within the first two hours, the temperature will be increased 1℉ per hour. Then temperature will be keeping at 2℉ higher than the originally set degree for 6 hours. 6 hours later, temperature will return to the originally set degree.
e)When in heating mode, within the first 2 hours, temperature will be decreased 1℉ per hour. Then temperature will be keeping at 2℉ Lower than the original degree for 6
hours.6 hours later, temperature will return to original degree you set.
g)When in dehumidify mode, the temperature will not be changed.
NOTE: When the room temperature is low and the indoor humidity is high, the condensate of the air conditioner may not be discharged in time. Water will accumulate in the unit that leads to the unit stops
working automatically for a long time. (At the moment, the “ 
” appears on the VFD display.) In order to let your unit recover working quickly, you can pull out the “Drain Port” which is located in the lower left bottom of the back of the unit. The condensate will be discharged several minutes after water be drained. Please use at least 1.5 liter pan to catch the dripping water.
It is not advised to use continuous drain method when the room temperature is higher than 90℉.
OPERATION USING REMOTE CONTROLLER
The remote controller provided with the unit may operate this portable air conditioner. The remote controller uses two - AAA batteries (provided). Install the batteries before using the remote controller.
REMOTE CONTROLLER
You can use the remote controller to do all the operations which can be done by the control panel. While you can only set SLEEP mode from the remote controller, not the control panel.
The LCD displays on remote controller either in Celsius or Fahrenheit. Press + and - keys simultaneously to change the display from Celsius to Fahrenheit or vice verse.
MAINTENANCE
10