Auto Mode
1)Install the exhaust hoses and window kit properly (see pages 7 , 8 & 9 ).
2)Plug the Power Cord into an electrical outlet.
3)Turn on the unit by pressing the POWER button on the control panel.
4)Press the MODE button until the “ 
” icon appears on the control panel display. Select the fan speed by pressing the FAN button.
NOTE: During AUTO mode, the unit operates in Heating mode when the room temperature is below 68 °F, Dehumidifier mode when the room temperature is between 68 °F to 80 °F. And Air Conditioner mode when the room temperature is above 80 °F.
Sleep Mode (This mode can only be selected when using the Remote control )
1)To set Sleep mode, make sure the unit is in Air Conditioner mode or Heating mode .
2)Press the SLEEP Button on the remote control. The “ 
” icon appears on the control panel display.
3)When in SLEEP mode, the fan will run on low to keep fan noise at a minimum.
4)When in Air Conditioner mode, the temperature setting will gradually increase to 2°F above the original set temperature for 6 hours. After 6 hours the temperature setting will return to the set temperature.
5)When in Heating mode, the temperature setting will gradually decrease to 2°F below the original set tem- perature for 6 hours. After 6 hours, the temperature setting will return to the set temperature.
6)When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.
Compressor Indicator
The “ 
” icon will light up on the control panel display when the compressor turns on. The “ 
” icon will turn off when the compressor shuts off.
13
