JVC KD-SH1000 manual Memory, Manual presetting, When an FM stereo broadcast is hard to receive

When an FM stereo broadcast is hard to receive

1Enter the MODE menu (see page 4).

2

3

4MO indicator lights up. Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same procedure and select “Off” in step 3. The MO indicator goes off.

Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme)

1Enter the MODE menu (see page 4).

2

	Storing stations in memory
You can preset six stations for each band.		ENGLISH
	FM station automatic presetting—
	SSM (Strong-station Sequential
	Memory)

1Select the FM band (FM1 – FM3) you want to store into.

2Enter the MODE menu (see page 4).

3

4

Local FM stations with the strongest signals are searched and stored automatically in the FM band.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band.

3

4	DX indicator goes off and LO
	indicator lights up.
	Only stations with sufficient
	signal strength will be detected.

To tune in to all receivable stations, repeat the same procedure and select “DX” in step 3. The LO indicator goes off and DX indicator lights up.

1

2

3Enter the MODE menu (see page 4).

•If you hold down 5/∞, the Preset Station List appears (go to step 6).

Continued on the next page

9