JVC KD-SH1000 manual Typical connections, !

ELECTRICAL CONNECTIONS

A Typical connections /

Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious	!
damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.

1Connect the colored leads of the power cord in the order specified in the illustration below.

2Connect the antenna cord.

3Finally connect the wiring harness to the unit.

If you have installed 3-way network speaker system in your car, see diagram for speaker

connection.

1

2

3

To subwoofer (see diagram )

)

Antenna connector

Rear ground terminal

LINE IN

(see diagram / )

15 A fuse

15 A

Black

Yellow*5

*5

Ignition switch

To metallic body or chassis of the car

To a live terminal in the fuse block connecting to the car battery (bypassing the ignition switch) (constant 12 V)

Line out (see diagram	)
	

To external components (see diagram )

 )

*4 Not supplied for this unit. *4

*5 Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on.

*5



  12 V

Fuse block

Red

To an accessory terminal in the fuse block

Blue

To automatic antenna if any (250 mA max.)

  250 mA

Blue with white stripe

To the remote lead of other equipment (200 mA max.)

 200 mA 

Orange with white stripe

To car light control switch

Brown

To cellular phone system

White with black stripe White Gray with black stripe Gray Green with black stripe Green Purple with black stripe Purple

Left speaker (front)		Right speaker (front)		Left speaker (rear)		Right speaker (rear)
							

3