JVC KD-SH1000 manual Control panel goes

!Attach the control panel.

⁄	• The control panel goes
	back to the previous
	position.

Cautions:

•Avoid using the SD card/USB memory when it might hinder your safety driving.

•Make sure all important data have been backed up to avoid losing the data.

If an SD card or USB memory has been

attached...

ENGLISH

Playback starts automatically if tracks are recorded.

Playing from a USB memory

This unit can play MP3/WMA tracks stored in a USB memory.

All tracks in the USB memory will be played repeatedly until you change the source.

•Removing the USB memory will also stop playback.

~

Ÿ USB input terminal

USB memory

To detach the USB memory, straightly pull it

out from the unit.

Playback starts from where it has been stopped previously.

•If a different SD card or USB memory is currently attached, playback starts from the beginning.

About MP3 and WMA tracks

MP3 and WMA “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.”

About the CD changer

It is recommended to use a JVC MP3-compatible CD changer with your unit.

•You can also connect MP3-incompatible CD changers. However, these units are not compatible with MP3 discs.

•You cannot use the CH-X99, CH-X100, and KD-MK series CD changers with this unit.

•You cannot play any WMA disc in the CD changer.

•Disc text information recorded in the CD Text can be displayed when a JVC CD Text compatible CD changer is connected.

•For connection, see Installation/Connection Manual (separate volume).

To fast-forward or reverse the track

Continued on the next page

15