JVC KD-SH1000 manual Indications Items Settings, reference Bright

Indications		Items		Settings, [reference page]
Bright		1 – 10 [Initial: 8]		: Adjust the display contrast to make the display indications clear
Display brightness				and legible. (If “Dimmer” is set to “On,” selecting “1” to “4“ takes
				no effect.)
ID3 Tag		•	On [Initial]	: Shows the Tag information while playing MP3/WMA tracks.
Tag display		•	Off	: Cancels.
Theme		•	Large	: Select the display theme for large graphic display, [5]. See page 22
Display theme			(1 [Initial] or 2)	for setting.
		•	Small	: Select the display theme for small graphic display, [5]. See page 22
			(1 [Initial] or 2)	for setting.
IF Band		•	Auto [Initial]	: Increases the tuner selectivity to reduce interference noises
Intermediate frequency				between close stations. (Stereo effect may be lost.)
band		•	Wide	: Subject to interference noises from adjacent stations, but sound
				quality will not be degraded and the stereo effect will remain.
Beep		•	On [Initial]	: Activates the key-touch tone.
Key-touch tone		•	Off	: Deactivates the key-touch tone.
Ext In*2		•	Changer [Initial]	: To use a JVC CD changer, [14] or an Apple iPod or a JVC D. player,
External input				[24].
		•	Ext In	: To use any other external component, [26].
Tel		•	Muting 1/	: Select either one which mutes the sounds while using a cellular
Telephone muting			Muting 2	phone.
				• If CD/CD-CH/SD/USB/iPod/D. player has been selected as the
		•	Off [Initial]	source, playback pauses during telephone muting.
				: Cancels.
Amp Gain		•	High PWR	: Volume 00 – Volume 50
Amplifier gain control		•	Low PWR	: Volume 00 – Volume 30 (Select this if the maximum power of the
		•	Off	speaker is less than 50 W to avoid damaging the speakers.)
				: Deactivates the built-in amplifier.
*1	Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*2	Displayed only when one of the following sources is selected—FM, AM, CD, SD, USB, or LINE-IN.

ENGLISH

21