JVC KD-SH1000 manual Speaker connections for 3-way network speaker system, Connecting subwoofer

CSpeaker connections for 3-way network speaker system /

You can enjoy a world of “pure audio” in your car by connecting 3-way network speaker system (high-range/mid-range/subwoofer).

IMPORTANT:

If you have installed the 3-way network speaker system in the car, make sure of the following.

•Connect the speaker system as illustrated below.

•Before using the system, activate crossover network and preset the appropriate cutoff frequencies for HPF/LPF (especially for HPF); otherwise, it may damage the speakers.

•For details about the setting, see pages 18 and 19 of the INSTRUCTIONS.

	!
•
•	HPF/LPF

HPF

• 18 19

When connecting the speakers (high-range/mid-range) through the speaker output



Left high-range speaker

Left mid-range speaker

White	Gray
White with black stripe	Gray with black stripe
Green	Purple
Green with black stripe	Purple with black stripe

Right high-range speaker

Right mid-range speaker

Connecting subwoofer /

Remote lead (Blue with white stripe)

Y-connector (not supplied for this unit)

Y

To subwoofer out

Remote lead

JVC Amplifier

JVC

Subwoofer

When connecting the speakers (high-range/mid-range) through the external amplifiers—to obtain more powerful sound

—

To LINE OUT (REAR) LINE OUT (REAR)

JVC Amplifier

JVC

To LINE OUT (FRONT) LINE OUT (FRONT)

JVC Amplifier

JVC

Left high-range speaker

Right high-range speaker

Left mid-range speaker

Right mid-range speaker

*3 Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.

*3  

*4 Signal cord (not supplied for this unit)

*4  

5