JVC KD-SH1000 manual Operations

ENGLISH		Other external component
		the LINE IN plugs on the rear or to the CD
		operations
	You can connect an external component to
	changer jack on the rear using the Line Input
	Adapter—KS-U57 (not supplied) or AUX Input
	Adapter—KS-U58 (not supplied).
	• For connection, see Installation/Connection
		Manual (separate volume).
	For listening to the SD card/USB memory, see
	pages 11 – 14; For iPod, or D.player, see pages
	24 and 25.
	~

LINE-IN :For selecting the external component connected to the LINE IN plugs.

EXT-IN :For selecting the external component connected to the CD changer jack.

If “EXT-IN” does not appear, see page 21 and select the external input (“Ext In”).

ŸTurn on the connected component and start playing the source.

!Adjust the volume.

⁄Adjust the sound as you want. (See pages 15 – 19.)

Maintenance

How to clean the connectors

Frequent detachment will deteriorate the connectors.

To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

Connector

Moisture condensation

Moisture may condense on the lens inside the CD player in the following cases:

•After starting the heater in the car.

•If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.

How to handle discs

When removing a disc from	Center holder
its case, press down the center
holder of the case and lift the
disc out, holding it by the edges.

•Always hold the disc by the

edges. Do not touch its recording surface.

When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up).

•Make sure to store discs into the cases after use.

26