JVC KD-SH1000 manual Maintenance

Other external component operations

You can connect an external component to the LINE IN plugs on the rear or to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied).

•For connection, see Installation/Connection Manual (separate volume).

For listening to the SD card/USB memory, see pages 14 – 17; For iPod, or D.player, see pages 27 – 29.

~

LINE-IN :For selecting the external component connected to the LINE IN plugs.

EXT-IN :For selecting the external component connected to the CD changer jack.

If “EXT-IN” does not appear, see page 25 and select the external input (“Ext In”).

ŸTurn on the connected component and start playing the source.

!Adjust the volume.

⁄Adjust the sound as you want. (See pages 18 – 22.)

Maintenance

		ENGLISH
	connectors.
	How to clean the connectors
Frequent detachment will deteriorate the
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.

Connector

Moisture condensation

Moisture may condense on the lens inside the CD player in the following cases:

•After starting the heater in the car.

•If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.

How to handle discs

When removing a disc from	Center holder
its case, press down the center
holder of the case and lift the
disc out, holding it by the edges.

•Always hold the disc by the

edges. Do not touch its recording surface.

When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up).

•Make sure to store discs into the cases after use.

Continued on the next page

33