JVC KD-SH1000 manual PTY Standby Reception, TA Standby Reception, Using the standby receptions

ENGLISH

5Store the setting.

6To store other PTY codes into other preset numbers.

Repeat steps 2 to 5.

7Finish the procedure.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch temporarily to your favorite PTY programme from any source other than AM.

•If DAB tuner is connected, Standby Reception also works to search for a DAB service.

To select your favorite PTY code for PTY Standby Reception, see page 24.

The PTY indicator either lights up or flashes.

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM.

The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 24).

•If DAB tuner is connected, Standby Reception also works to search for a DAB service broadcasting Traffic Announcement.

To activate TA Standby Reception

The TP (Traffic Programme) indicator either lights up or flashes.

•If the TP indicator lights up, TA Standby Reception is activated.

•If the TP indicator flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the RDS signals required for TA Standby Reception.)

To activate TA Standby Reception, tune in to another station (or DAB service) providing the related signals. The TP indicator will stop flashing and remain lit.

To activate the PTY Standby Reception

1Enter the MODE menu (see page 4).

2

3Select one of the PTY codes.

4Finish the procedure.

The PTY indicator either lights up or flashes.

•If the PTY indicator lights up, PTY Standby Reception is activated.

•If the PTY indicator flashes, PTY Standby Reception is not yet activated.

To activate PTY Standby Reception, tune in to another station providing these signals. The PTY indicator will stop flashing and remain lit.

To deactivate the PTY Standby Reception, select “Off” in step 3. The PTY indicator goes off.

12