Operation with a Full Function Handset | 4-17 |
To cancel the scan, press the CLR key or press FUNC followed by 2/ SCAN.
Using All Scan
Press the FUNC key followed by the 2/SCAN key The messages MEM and SCAN flash for 3 seconds on the LCD. Before the 3 seconds elapse, press the 2/SCAN key again to begin All Scan. If the 3 seconds elapse before you press the 2/SCAN key, the radio will enter Memory Scan.
To cancel the scan, press the CLR key or press FUNC followed by 2/ SCAN.
4.4.14Monitor Mode
Monitor operation can be implemented in one of two modes: Dual-Watch or Tri-Watch.
Dual-Watch
In Dual-Watch Mode, the RAY215 operates on the Working Channel while constantly monitoring the Priority Channel. The radio locks onto the Priority Channel or the Working Channel whenever it becomes active, then returns to Dual-Watch when there is no activity.
To start Dual-Watch Mode, select the desired Working Channel then press the MON key. The Working Channel is displayed on the 7-segment display and the Priority Channel appears on the right side of the dot matrix display.
To end Dual-Watch mode at the current channel, press the MON key or the CLR key. If Dual-Watch mode is initiated at Channel 70, the operation is cancelled and an error alert sounds.
Tri-Watch
In Tri-Watch Mode, the RAY215 operates on the Working Channel while constantly monitoring the Priority Channel then the previously selected Weather Channel for severe weather alert broadcasts. When a signal is detected on the Working Channel or Priority Channel, that channel becomes active. When there is no longer any activity on the Working Channel or Priority Channel, the RAY215 returns to Tri-Watch.
If a weather alert broadcast is detected, the RAY215 emits an alert tone and the WX indicator blinks. Tri-Watch mode terminates and the radio switches to the WX channel to monitor the severe weather broadcast.
