
Operation with a Fist Microphone | ||
|
|
|
PRESS & REL
DSC + D/L
ROTATE | PRESS & REL | |||
CH | ||||
DSC | ||||
| ||||
Select desired digit |
|
|
| |
PRESS & REL |
| ROTATE | ||
DSC |
| CH | ||
|
|
|
|
Continue thru last digit position
PRESS & REL |
| |
DSC |
|
|
Radio enters DSC mode | MMSI digit | digit position |
ROTATE |
|
|
CH |
|
|
Next digit position | Select desired digit | |
PRESS & RELEASE |
| |
DSC |
|
|
Select desired digit |
|
|
Radio replays all digits through the 9th position | ||
PRESS & RELEASE |
| |
DSC |
| Process starts over |
PRESS & HOLD |
| |
DSC | MMSI number accepted |
Radio replays all digits... | ...through the 9th position |
10.After you have selected the other ship's MMSI number, the radio prompts you for the working channel you wish to communicate on. The large character display shows the last used channel number and a "W" appears in the small channel display. Using the Channel Select (CH) knob on the front panel, select the desired working channel for the Individual Call.
11.Press the DSC/PRI key once. The TX indicator on the LCD flashes, indicating the RAY215 is ready to transmit.
12.Press the PTT key to send the digital "packet" of information. The radio waits for an acknowledgment from the targeted ship or station.
13.If the target station acknowledges, a tone sounds and "ACK" illuminates on the LCD. After 2 seconds, the RAY215 switches to the previously selected working channel.
or
If the call is not acknowledged, exit the DSC mode by pressing the 16/ 9 key.